Post by spains on Mar 30, 2022 21:15:04 GMT
Last week I activated the Off Road Menu on Golf 7.5 2019. As usual, not having the ship/navi, the static error of the coding Control Unit comes out incorrectly. Since I don't want to have this error (which does not cause problems anyway) I have reset the values. From the byte24 (longcoding) and then two adaptations.
In the screens you can see the modification made for offroad menu and then the reset of the values.
Do you know what happens? After the scan the error U101400 remains but is now green, intermittent. Why? In Module 5F I have not touched anything else.
This is the coding
Module 5F Information Control Unit
Security access -> 20103
Long coding (Text mode) - Byte_24_Navigation_System -> On
Adaptation
Submenu - Car_Function_Adaptations_Gen2
- menu_display_compass -> Active
- menu_display_compass_over_threshold_high -> Active
Adaptation
Submenu - Car_Function_List_BAP_Gen2
- compass_0x15 -> Active
- compass_0x15_msg_bus -> Comfort data bus (from inactive)
Screen: ibb.co/album/5WdGS3
In the screens you can see the modification made for offroad menu and then the reset of the values.
Do you know what happens? After the scan the error U101400 remains but is now green, intermittent. Why? In Module 5F I have not touched anything else.
This is the coding
Module 5F Information Control Unit
Security access -> 20103
Long coding (Text mode) - Byte_24_Navigation_System -> On
Adaptation
Submenu - Car_Function_Adaptations_Gen2
- menu_display_compass -> Active
- menu_display_compass_over_threshold_high -> Active
Adaptation
Submenu - Car_Function_List_BAP_Gen2
- compass_0x15 -> Active
- compass_0x15_msg_bus -> Comfort data bus (from inactive)
Screen: ibb.co/album/5WdGS3
