Post by dubnerd on Apr 2, 2017 22:07:16 GMT
Data Log Below...
2017 Golf R USA
Euro LED Talis
DAP tail light harness with rear fog
Euro headlight switch
After installing all the above everything worked fine, no errors. It all started when I tried to enable the rear fog icon,
Central Elec, long coding, Byte7 Bit 4. Errors started immediately. Can someone check if that is my problem
Now EVERYTHING works just fine. Turn signals, front and rear lights, adaptive headlights, etc.... but when I turn on a turn signal (left or right) the exterior lights blink just fine, but in the cluster it blinks rapidly like a bulb is out. When I turn the emergency flashers on the work just fine, even in the cluster.
Also with comfort blinking, exterior blinks 3 times (normal), in the cluster it blinks like 6 times.
When I first turn the car on I get a Warning of front vehicle lighting and then one for each turn signal.
I've been trying to change Leuchte8fl and 9fl
What is the "Lasttyp" for each channel? The first value, mine was on (3) Xenon, that can't be right
What are the A and B Channels? Values for (4) and (5)? These should be for the parking lights. I can Post a screen shot if not clear.
DV52, I have read your book on "How MQB platform vehicles...." trying to figures this out. I screwed something up somewhere and wonder if there is a link of picture of the Leuchte settings. Should I reset? I've gone through my history like 20 times but cant figure this out. I can post that too but it's LONG.
Thanks!!
OBDeleven data log
Date: 2017-04-02 15:03
Car: Volkswagen Golf R
Year: 2017
Engine: CYFB
Mileage: 7543 KM
---------------------------------------------------------------
09 Central Electrics
System description: BCM MQBAB HNA
Software number: 5Q0937085BL
Software version: 0175
Hardware number: 5Q0937085AF
Hardware version: H24
Serial number: 01061615700117
ODX name: EV_BCMMQB
ODX version: 015001
Long coding: 06010A46C041B2F169E44000091C07201800000000000000000000000000
Subsystems:
System description: WWS 160513
Software version: 0551
Hardware version: 043
Serial number: 160527112522
Long coding: 0E4DDD
System description: RLHS
Software version: 0059
Hardware version: 037
Serial number: S5Y16M06D13H13M14S37
Long coding: 90A8DD
Trouble codes:
U101400 - Control module incorrectly coded
static
Letzte Weckursache/ Werte [00;2E]: keine Störschutzursache
Status Bremslichtschalter (CAN): Off
Off: not activated
Terminal 50 status: Off
Outside air temperature: 18.0 °C
Terminal 15 status: On
Unlearning counter: 213
Mileage: 7543 km
Priority: 2
Parking light left: not activated
Low beam: not activated
Status Bremslichtschalter (HW): Off
Date: 2017-04-02 15:02:42
Automatic high beam assist: operated
Voltage: 12.3 V
Parking light right: not activated
Malfunction frequency counter: 1
CAN-Bus_aktiv: On
Parking light: not activated
U112100 - Databus missing message
static
Sent from my Galaxy Tab E Lite
2017 Golf R USA
Euro LED Talis
DAP tail light harness with rear fog
Euro headlight switch
After installing all the above everything worked fine, no errors. It all started when I tried to enable the rear fog icon,
Central Elec, long coding, Byte7 Bit 4. Errors started immediately. Can someone check if that is my problem
Now EVERYTHING works just fine. Turn signals, front and rear lights, adaptive headlights, etc.... but when I turn on a turn signal (left or right) the exterior lights blink just fine, but in the cluster it blinks rapidly like a bulb is out. When I turn the emergency flashers on the work just fine, even in the cluster.
Also with comfort blinking, exterior blinks 3 times (normal), in the cluster it blinks like 6 times.
When I first turn the car on I get a Warning of front vehicle lighting and then one for each turn signal.
I've been trying to change Leuchte8fl and 9fl
What is the "Lasttyp" for each channel? The first value, mine was on (3) Xenon, that can't be right
What are the A and B Channels? Values for (4) and (5)? These should be for the parking lights. I can Post a screen shot if not clear.
DV52, I have read your book on "How MQB platform vehicles...." trying to figures this out. I screwed something up somewhere and wonder if there is a link of picture of the Leuchte settings. Should I reset? I've gone through my history like 20 times but cant figure this out. I can post that too but it's LONG.
Thanks!!
OBDeleven data log
Date: 2017-04-02 15:03
Car: Volkswagen Golf R
Year: 2017
Engine: CYFB
Mileage: 7543 KM
---------------------------------------------------------------
09 Central Electrics
System description: BCM MQBAB HNA
Software number: 5Q0937085BL
Software version: 0175
Hardware number: 5Q0937085AF
Hardware version: H24
Serial number: 01061615700117
ODX name: EV_BCMMQB
ODX version: 015001
Long coding: 06010A46C041B2F169E44000091C07201800000000000000000000000000
Subsystems:
System description: WWS 160513
Software version: 0551
Hardware version: 043
Serial number: 160527112522
Long coding: 0E4DDD
System description: RLHS
Software version: 0059
Hardware version: 037
Serial number: S5Y16M06D13H13M14S37
Long coding: 90A8DD
Trouble codes:
U101400 - Control module incorrectly coded
static
Letzte Weckursache/ Werte [00;2E]: keine Störschutzursache
Status Bremslichtschalter (CAN): Off
Off: not activated
Terminal 50 status: Off
Outside air temperature: 18.0 °C
Terminal 15 status: On
Unlearning counter: 213
Mileage: 7543 km
Priority: 2
Parking light left: not activated
Low beam: not activated
Status Bremslichtschalter (HW): Off
Date: 2017-04-02 15:02:42
Automatic high beam assist: operated
Voltage: 12.3 V
Parking light right: not activated
Malfunction frequency counter: 1
CAN-Bus_aktiv: On
Parking light: not activated
U112100 - Databus missing message
static
Sent from my Galaxy Tab E Lite