|
|
Post by falconf1 on Mar 16, 2022 10:39:34 GMT
Hi, anyone know how to coding the Front Grille Led Bars in the new Tiguan AS. what is the name of the Led Bars in Central Electric ? thanks Attachments:
|
|
|
|
Post by barcode on Jun 7, 2022 4:06:20 GMT
i will be curious to know this as well. i will bump you to learn more from others on this forum that are smarter than us.
|
|
|
|
Post by mrew42 on Jul 21, 2023 14:31:05 GMT
New here but in my digging i've found that they can be enabled by using Scandinavian DRL.
Don't know if that helps at all....
|
|
|
|
Post by dv52 (Australia) on Jul 21, 2023 22:28:27 GMT
hmm........ I don't know the answer to this question - but I suspect that it might be able to be found in the Leuchte-set information in the back-up file for the central electrics module.
I'm more than happy to have a look - but of course I will need someone who owns an Allspace to create the back-up file and to post it up (as an attachment, please - it will be a fairly large file)
Also and because I don't actually have a MY 22 Allspace in my workshop - some-one will need to describe how the front-grill LED light bars on this car operate. This description is needed so that I can identify the correct Leuchte-commands in the adaptation channels.
I assume that these LED light-bars switch-ON when the ignition is switched-ON, but I also need to understand what happens to these lights after-dark and if the LED behavior changes under any other lighting conditions?
Anyhow- my offer is out-there if anyone is prepared to supply the necessary information! Of course, no guarantees - even if the back-up file is provided
Don
|
|
|
|
Post by koldico on Jul 22, 2023 10:56:27 GMT
I wish I could, but mine is my21, if it can help you with something, just tell me and I'll give you the information about my car, since I'm here and sorry for dirtying the thread, do you know if there is a possibility of activating swap codes in the mib3, I want to activate 00060400, and you also know if you can activate or enter the exlap program. Sorry for dirtying the thread and thank you very much for your contributions you are a crack. All the best.
|
|
|
|
Post by dv52 (Australia) on Jul 22, 2023 21:02:27 GMT
I assume that you are aware of Jilleb_MIB3-Toolbox - but I'm not sure that it can be used to install the performance monitor FEC (I assume that you don't have the VCRN for the FEC).
Don
|
|
|
|
Post by koldico on Jul 23, 2023 8:39:34 GMT
I don't know the truth, I didn't know there was a patch for mib3. Where can it be obtained? How can mib3 be patched?
|
|
|
|
Post by koldico on Jul 23, 2023 8:51:39 GMT
What is Vcrn y Fec?
|
|
|
|
Post by dv52 (Australia) on Jul 23, 2023 22:12:35 GMT
koldico : Please don't take offense - but if you are asking very basic asking questions like what is VCRN (Vehicle Component Registration Number) and FEC (Function Enabling Codes) - then I suggest that you don't proceed with this matter as a personal exercise!
Again, I intend no offense in making this suggestion - it's just that the process is very technical because it involves "hacking" the MIB firmware in a manner that requires detailed and very precise expertise.
For those uninitiated in the required expertise, the process will very likely result in bricking the MIB unit beyond repair
The other, more impacting matter here is that MIB3 modules are relatively new and therefore far less material is in the public domain about how to hack these current-generation units!!
Anyway - if you still want to proceed (and again without offense - I suggest that you do not proceed), perhaps first consider learning more about how VW has protected their SWAP (Software as Product) protocols. To this end, Mr Google is probably a good starting point!!
Alas, learning this stuff via question/answers in posts is simply well beyond the capabilities of forums like this one!!
Don
|
|
|
|
Post by koldico on Jul 24, 2023 9:24:07 GMT
You do not offend me, it would be missing more, on the contrary I thank you for the advice and the explanation that you are absolutely right, I can be left without a unit if it is not done well. Regarding what you say, basic knowledge you are right, the problem is that there is no swap generator for the mib3 or I have not found it, the fec that I want to activate is 00060400 the sport hmi mode, but I can't really get anything, for my MOI3_EU_VWMQB_P30600P unit
And sorry for the inconvenience, but I'm desperate. I've been trying to activate the sport hmi mode for 2 years and I can't get anything if it's not paying €800 that they asked me for and it seems excessive for what I want to activate, but that's another topic. Thank you very much for your help, crack, greetings.
|
|
|
|
Post by barcode on Nov 27, 2023 0:43:05 GMT
i appreciate this offer however I am still a new auto hacking user and have been exercising caution around what I do to my '22 tiguan. The LED light bar is a cool looking light and it would be exciting to customize how it is used. I can say that I have experimented on what happens to the light and how it works. -led bar turns on with only the headlights (either auto or on) -the LED bar light turns on with day time running lights only when it is remote started. then turns off once car is properly started. (unless headlights are turned auto/on then the LED bar turns on with headlights. as for the back up file, ill have to do some searching around this forum to figure out how to provide that. I can posted it to a custom google drive link or something so you can access the large file. appreciate this offer on helping us out with the LED bar. hmm........ I don't know the answer to this question - but I suspect that it might be able to be found in the Leuchte-set information in the back-up file for the central electrics module.
I'm more than happy to have a look - but of course I will need someone who owns an Allspace to create the back-up file and to post it up (as an attachment, please - it will be a fairly large file)
Also and because I don't actually have a MY 22 Allspace in my workshop - some-one will need to describe how the front-grill LED light bars on this car operate. This description is needed so that I can identify the correct Leuchte-commands in the adaptation channels.
I assume that these LED light-bars switch-ON when the ignition is switched-ON, but I also need to understand what happens to these lights after-dark and if the LED behavior changes under any other lighting conditions?
Anyhow- my offer is out-there if anyone is prepared to supply the necessary information! Of course, no guarantees - even if the back-up file is provided
Don
|
|
