|
|
Post by adrianrdale on Mar 4, 2022 15:40:29 GMT
Guys, try to play with my ARONA FR sport, when I access the modules some are green no issues can read and change, red faults listed BUT I have some in Black and will not read Any suggestions please
|
|
|
|
Post by whataboutthis on Mar 4, 2022 23:32:22 GMT
support.obdeleven.com/en/articles/5608804-control-units-listEach control unit has a status indicator at top right corner, the indicator can be GREEN, RED, YELLOW, BLACK (The number in the indicator is showing the corresponding control unit number): *GREEN - Control unit is in working condition and without any trouble codes. *RED - Control unit is in working condition but it has some trouble codes. *YELLOW - Control unit is in working condition but it is not installed in Gateway installation list. Use the Gateway list coding function to add this control unit to the Gateway installation list. *BLACK - Control unit is installed into Gateway but it is not reachable. If you have uninstalled this control unit you will need to remove it from Gateway installation list, in another way you will need to check the functionality of control unit. *WHITE - Control unit is currently offline.
|
|
|
|
Post by adrianrdale on Mar 5, 2022 9:16:47 GMT
So no real way of opening a black unit wanted to fit a rear camera but it needs 6C module open to do it.
Thank you
|
|
|
|
Post by whataboutthis on Mar 5, 2022 13:36:11 GMT
If its black then its either not working or not fitted.
Whilst i appreciate the 6C is the Rear View Camera on some more modern cars slight older cars the coding used was in 09 long coding so I would check you have the correct coding for your car.
|
|
|
|
Post by adrianrdale on Mar 7, 2022 12:23:10 GMT
hi guys played around and found the coding all installed and working  will post details later |
|
