Post by peabody58 on Mar 2, 2022 3:11:02 GMT
Hello all. New member here. In the process of upgrading from a RNS-510 / Dynaudio to what should have been a simply Plug & Play MIB2 PQ +/Nav unit from a very competent independent supplier. When I turn the unit on the volume is very loud with no volume control from the unit or the steering wheel. Every once in awhile after I've been troubleshooting, the unit will start to control volume and everything works great with the Dynaudio system until the car/radio is turned off. The supplier is working with me to 'tweak' the Long Coding. He says he has done over a hundred of these MIB2 retrofits and has never had one returned, let alone have this kind of volume control issue. Who knows, I may have the only defective MIB2 on the planet. If that's the case, then the supplier may send me a different one to use.
The car is a 2014 VW Eos Executive. Yes I know this is a Golf Mk6 forum, but the Eos is built on a Mk6 platform and this forum has more traction than the Eos forum. I did have to change out the rear view camera to a MIB2 compatible camera and all is good on that end. Everything works except initial ability to control volume. It's as if the MIB2 is having trouble communicating/hand-shaking with the Dynaudio amp; and then sometimes after awhile it does communicate and all is well for a short time. Very confusing and frustrating. Obviously my Plan B would be to reinstall the RNS-510/original camera, but I'd really like to get this MIB2 to work consistently with the Dynaudio system.
So what I would like is if anyone has done a similar swap or have a MIB2/Dynaudio set-up; could you share your 5F Long Coding? I have changed my Long Coding once per the supplier's recommendation and rebooted the MIB2, but to no avail.
I have searched extensively on this forum, youTube, Ross Vag-Com forums, VWVortex and other places for similar volume control issues, but they usually reference no or low volume, not a Loud uncontrollable volume. For what it's worth, if I connect my phone to the MIB2 using Bluetooth and play SiriusXm from my phone, I can control volume using my phone.
On a plus note, I was able to easily make 3 App changes which we always wanted:
DRL OFF with handbrake ON, Emergency braking lights Brakes and Turn signals, and Comfort turn signal to 5
Thank you in advance to all you experts.
OBDeleven vehicle history log
Date: 2022-03-01 13:14
AFTER LONG CODING CHANGED IN MIB2
VIN: WVWFW8AH8EV003184
Car: Volkswagen Eos
Year: 2014
Body type: Coupe convertible
Engine: CBFA
Mileage: 79440 K
---------------------------------------------------------------
Long coding
Control unit: 56 Radio
Old value:
027300020000000051220003001808001F0100D400200100C6
New value:
02730002AA00000051220003001808001F0100D400200100C6
---------------------------------------------------------------
Long coding
Control unit: 37 Navigation
Old value:
027300020000000051220003001808001F0100D400200100C6 < MIB2 Coding done by vendor.
New value:
02730002AA00000051220003001808001F0100D400200100C6 < Coding change vendor had me try.
---------------------------------------------------------------
Fault
Control unit: 19 Gateway
Active faults: 0
Inactive faults: 2
System description: J533 Gateway
Software number: 7N0907530AK
Software version: 1642
Hardware number: 7N0907530AK
Hardware version: H57
Serial number: 251113F1003030
Faults:
00463 - Digital Sound System Control Module
No signal/communication Intermittent < I believe this is the major culprit.
01302 - Telematics control module / emer call
module No signal/communication Intermittent
---------------------------------------------------------------
Fault
Control unit: 37 Navigation
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D < This is the MIB2.
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Control module Software incompatible static
U110100 - Component protection active static
B126CF2 - Navigation system Navigation database not enabled Intermittent
B129B13 - Microphone 1 Open circuit Intermittent
---------------------------------------------------------------
Fault
Control unit: 56 Radio
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Unknown static
U110100 - Unknown static
B126CF2 - Unknown Intermittent
B129B13 - Unknown Intermittent
---------------------------------------------------------------
Fault
Control unit: 5F Multimedia
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Control module Software incompatible static
U110100 - Component protection active static
B126CF2 - Navigation system Navigation database not enabled Intermittent
B129B13 - Microphone 1 Open circuit Intermittent
---------------------------------------------------------------
Fault
Control unit: 75 Telematics
Active faults: 0
Inactive faults: 3
System description: OCULowUSA
Software number: 561035285
Software version: 0102
Hardware number: 561035285
Hardware version: 014
Serial number: 00000355414051266033
ODX name: EV_OCULow
ODX version: 001010
Faults:
U112100 - Unknown Intermittent
B105313 - Unknown Intermittent
B1788F0 - Unknown static
---------------------------------------------------------------
Fault
Control unit: 77 Telephone
Active faults: 0
Inactive faults: 1
System description: TELEFON
Software number: 5N0035729A
Software version: 0315
Hardware number: 5N0035729A
Hardware version: H05
Serial number: 00007665454710
ODX name: EV_UHVUMI
ODX version: 001007
Faults:
B104813 - Telephone microphone Open circuit static
The car is a 2014 VW Eos Executive. Yes I know this is a Golf Mk6 forum, but the Eos is built on a Mk6 platform and this forum has more traction than the Eos forum. I did have to change out the rear view camera to a MIB2 compatible camera and all is good on that end. Everything works except initial ability to control volume. It's as if the MIB2 is having trouble communicating/hand-shaking with the Dynaudio amp; and then sometimes after awhile it does communicate and all is well for a short time. Very confusing and frustrating. Obviously my Plan B would be to reinstall the RNS-510/original camera, but I'd really like to get this MIB2 to work consistently with the Dynaudio system.
So what I would like is if anyone has done a similar swap or have a MIB2/Dynaudio set-up; could you share your 5F Long Coding? I have changed my Long Coding once per the supplier's recommendation and rebooted the MIB2, but to no avail.
I have searched extensively on this forum, youTube, Ross Vag-Com forums, VWVortex and other places for similar volume control issues, but they usually reference no or low volume, not a Loud uncontrollable volume. For what it's worth, if I connect my phone to the MIB2 using Bluetooth and play SiriusXm from my phone, I can control volume using my phone.
On a plus note, I was able to easily make 3 App changes which we always wanted:
DRL OFF with handbrake ON, Emergency braking lights Brakes and Turn signals, and Comfort turn signal to 5
Thank you in advance to all you experts.
OBDeleven vehicle history log
Date: 2022-03-01 13:14
AFTER LONG CODING CHANGED IN MIB2
VIN: WVWFW8AH8EV003184
Car: Volkswagen Eos
Year: 2014
Body type: Coupe convertible
Engine: CBFA
Mileage: 79440 K
---------------------------------------------------------------
Long coding
Control unit: 56 Radio
Old value:
027300020000000051220003001808001F0100D400200100C6
New value:
02730002AA00000051220003001808001F0100D400200100C6
---------------------------------------------------------------
Long coding
Control unit: 37 Navigation
Old value:
027300020000000051220003001808001F0100D400200100C6 < MIB2 Coding done by vendor.
New value:
02730002AA00000051220003001808001F0100D400200100C6 < Coding change vendor had me try.
---------------------------------------------------------------
Fault
Control unit: 19 Gateway
Active faults: 0
Inactive faults: 2
System description: J533 Gateway
Software number: 7N0907530AK
Software version: 1642
Hardware number: 7N0907530AK
Hardware version: H57
Serial number: 251113F1003030
Faults:
00463 - Digital Sound System Control Module
No signal/communication Intermittent < I believe this is the major culprit.
01302 - Telematics control module / emer call
module No signal/communication Intermittent
---------------------------------------------------------------
Fault
Control unit: 37 Navigation
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D < This is the MIB2.
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Control module Software incompatible static
U110100 - Component protection active static
B126CF2 - Navigation system Navigation database not enabled Intermittent
B129B13 - Microphone 1 Open circuit Intermittent
---------------------------------------------------------------
Fault
Control unit: 56 Radio
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Unknown static
U110100 - Unknown static
B126CF2 - Unknown Intermittent
B129B13 - Unknown Intermittent
---------------------------------------------------------------
Fault
Control unit: 5F Multimedia
Active faults: 0
Inactive faults: 4
System description: MU-S-NS-US
Software number: 5C0035684D
Software version: 0478
Hardware number: 5C0035684
Hardware version: H22
Serial number: VWZAZ2R0470739
ODX name: EV_MUStd4CTSAT
ODX version: 001022
Faults:
B200087 - Control module Software incompatible static
U110100 - Component protection active static
B126CF2 - Navigation system Navigation database not enabled Intermittent
B129B13 - Microphone 1 Open circuit Intermittent
---------------------------------------------------------------
Fault
Control unit: 75 Telematics
Active faults: 0
Inactive faults: 3
System description: OCULowUSA
Software number: 561035285
Software version: 0102
Hardware number: 561035285
Hardware version: 014
Serial number: 00000355414051266033
ODX name: EV_OCULow
ODX version: 001010
Faults:
U112100 - Unknown Intermittent
B105313 - Unknown Intermittent
B1788F0 - Unknown static
---------------------------------------------------------------
Fault
Control unit: 77 Telephone
Active faults: 0
Inactive faults: 1
System description: TELEFON
Software number: 5N0035729A
Software version: 0315
Hardware number: 5N0035729A
Hardware version: H05
Serial number: 00007665454710
ODX name: EV_UHVUMI
ODX version: 001007
Faults:
B104813 - Telephone microphone Open circuit static
