ewk
New Member
Posts: 6
|
Post by ewk on Mar 1, 2022 19:13:12 GMT
Hi all! I have normale cruise control on my Golf mk7 on the steering wheel. With + and - I could adjust + 10 or - 10 km/h. That changed somehow to +1 and - 1. I only used some apps for changes, and nothing with cruise control (I checked the history). How can I change that back? There is no app for it and can't find something in long coding, nor on this forum or google. Saw how to change that with acc, but I don't have acc, just normal cc (and don't have module 13). Thanks!
[edit: FIX below]
|
|
|
|
Post by dv52 (Australia) on Mar 1, 2022 20:45:46 GMT
What part of the instructions below don't work as specified?
Increasing the set speed (during CCS control): - Briefly press the RES button on the multifunction steering wheel to increase the speed in small increments of 1 km/h (1 mph) and to store the speed. The vehicle accelerates actively until it reaches the new set speed.
- Press the + button on the multifunction steering wheel briefly to increase the speed in increments of 10 km/h (5 mph) and to store the speed.
- Press and hold the + button on the multifunction steering wheel to increase the speed continuously until the button is released and to store the speed.
Decreasing the set speed (during CCS control): - Briefly press the SET button on the multifunction steering wheel to reduce the speed in small increments of 1 km/h (1 mph) and to store the speed. The system will decrease the speed until the new set speed is reached by easing off the accelerator without actively braking.
- Press the - button on the multifunction steering wheel briefly to reduce the stored speed in increments of 10 km/h (5 mph) and to store the speed.
- Press and hold the - button on the multifunction steering wheel to reduce the speed continuously until the button is released and to store the speed.
|
|
|
|
Post by vwjap on Mar 1, 2022 22:32:34 GMT
Press and hold it will go up in 5-10
|
|
ewk
New Member
Posts: 6
|
Post by ewk on Mar 2, 2022 15:37:38 GMT
Press and hold it will go up in 5-10 Okay, thanks. But at first it was just a single push on the + or - for + or - 10 km/h. I would like that back, but can't find where. What part of the instructions below don't work as specified?
Increasing the set speed (during CCS control): - Briefly press the RES button on the multifunction steering wheel to increase the speed in small increments of 1 km/h (1 mph) and to store the speed. The vehicle accelerates actively until it reaches the new set speed.
- Press the + button on the multifunction steering wheel briefly to increase the speed in increments of 10 km/h (5 mph) and to store the speed.
- Press and hold the + button on the multifunction steering wheel to increase the speed continuously until the button is released and to store the speed.
Decreasing the set speed (during CCS control): - Briefly press the SET button on the multifunction steering wheel to reduce the speed in small increments of 1 km/h (1 mph) and to store the speed. The system will decrease the speed until the new set speed is reached by easing off the accelerator without actively braking.
- Press the - button on the multifunction steering wheel briefly to reduce the stored speed in increments of 10 km/h (5 mph) and to store the speed.
- Press and hold the - button on the multifunction steering wheel to reduce the speed continuously until the button is released and to store the speed.
Just a single press on the + or - button only does + or - 1km/h instead of 10. |
|
|
|
Post by vwjap on Mar 2, 2022 17:16:45 GMT
But what don is saying if you want 10 use the set and res buttons
|
|
ewk
New Member
Posts: 6
|
Post by ewk on Mar 6, 2022 9:09:43 GMT
I would like res and set for +1 and - 1.
They don't do anything now (they did berfore)
Hope there is a fix.
|
|
ewk
New Member
Posts: 6
|
Post by ewk on Mar 6, 2022 17:58:50 GMT
I. Would like it to be like stock, like this. Where can I find the settings for that? imgur.com/1iKWgFD |
|
|
|
Post by dv52 (Australia) on Mar 6, 2022 20:41:58 GMT
Module 13 Adaptive Cruise Control
Coding
Operation_mode (which is Byte 14, Bit 4)
change to operation_mode_1 (which is Bit 4 =0) If needed, Security access =20103
Don
|
|
ewk
New Member
Posts: 6
|
Post by ewk on Mar 7, 2022 6:28:24 GMT
Hi! Thanks for your answer. I don't have ACC, so there is no module 13.
|
|
|
|
Post by dv52 (Australia) on Mar 7, 2022 23:58:10 GMT
what happens if you hit the RES button twice?
|
|
ewk
New Member
Posts: 6
|
Post by ewk on Mar 15, 2022 7:43:57 GMT
Found a fix. Used the app in ODBeleven 'audi throttle response' that messed it up. Turned that off and it was back to original. Thanks for your help!
|
|
|
|
Post by vwgtimk72015 on Nov 24, 2022 0:50:06 GMT
what happens if you hit the RES button twice? I will try and report back as I'm having the same issue as this guy. I haven't applied Audi throttle response unless the tune does it by itself. I don't have ACC either and the previous behaviours was +/- for 1km/h and RES/SET for 10mk/h increments. After the EQT Stage 1 Tune, it does +/- for 1km/h and long press +/- for 10km/h while CC is deactivated (on resume; not to be confused with OFF). Pressing twice on RES didn't change anything... |
|
|
|
Post by vwgtimk72015 on Dec 6, 2022 0:47:50 GMT
BUMP? What's the module under which I could change the setting?
|
|
