drc37
Full Member
Posts: 172
|
Post by drc37 on Feb 21, 2022 10:48:48 GMT
function:
activate the basic settings for transmission gear
VEHICLE: SEAT IBIZA 2018 1.0ECOTSI DSG
One-click App: DSG calibration of synchro-points of transmission
APPLICATION DESCRIPTION: activate the basic settings for transmission gear
requirements
CONTROL UNIT :
?
FUNCTION:
activate the basic settings for transmission gear
requirements
PROCEDURE:
transmission fluid temperature must be 30-100C deg
selector lever in Park position
engine idle speed
parking brake and foot brake applied during entire procedure
|
|
|
Post by One-Click apps developer on Feb 22, 2022 6:30:26 GMT
Hello,
not possible to create this application because the car does not support this function.
|
|
drc37
Full Member
Posts: 172
|
Post by drc37 on Feb 22, 2022 8:12:18 GMT
I wonder why ? I have a dsg transmission in my car. and I wanted to reset the dsg transmission user profiles. Is it possible to make a one-click application for this?
|
|
|
Post by One-Click apps developer on Feb 22, 2022 8:42:59 GMT
Because the function of "calibration of synchro-points of transmission" is not available.
Is just "basic setting of transmission" function which possible to create.
|
|
drc37
Full Member
Posts: 172
|
Post by drc37 on Feb 22, 2022 8:56:40 GMT
"basic setting of transmissio"
For this, I can create my one-click application request again, or can you add that application? because that's what i wanted to do
|
|
drc37
Full Member
Posts: 172
|
Post by drc37 on Feb 22, 2022 10:01:02 GMT
"basic setting of transmissio"
Shall I create a one-click application request again?
|
|