|
|
Post by maniek on Feb 21, 2022 7:19:28 GMT
Could you pls add in aps:
One click App name: Traffic jam assist activation
Requirements
car must be equipped in ACC and lane assist
|
|
|
|
Post by One-Click apps developer on Feb 21, 2022 7:20:48 GMT
Hello,
To activate this function, we need additional functionality in our application.
The app will be developed in the future when we have the functionality to build it.
|
|
|
|
Post by maniek on Feb 21, 2022 8:42:33 GMT
Thx for info
in general I'm able to code this function , only ACC from 0km/h is my limitation
|
|
|
|
Post by maniek on Apr 2, 2022 12:19:38 GMT
I found this procedure-- for AUDI--- DON'T know if correct--- could you pls check? UNIT 13: LONG CODING Traffic jam dependent linear tracking- activated Assistant for traffic hold up- activated Automatic driveaway by pretrigger- activated Automatic driveaway after short stop- activated Driveaway by triggerleaver- activated Curve assistant- activated Traffic jam assistant in car menu- activated Dense traffic- activated Emergency assist- installed Emergency steer assist- activated Travel assist- deactivated, activated?? Assistent for end of traffic jam 1.0- deactivated, activated?? UNIT A5: LONG CODING BYTE 16, BIT 5 (STA)  - i do not have any description mentioned bit so don't know if correct or long coding Emergency assist- (activate)?? UNIT 44: LONG CODING: BYTE 02, BIT 0---- heading control assistant BYTE 06, BIT 0---- traffic jam guidance assist i do not have any description mentioned bits so don't know if they are correct UNIT 5F: ADAPTATIONS vehicle function list BAP, 2. generation, expansion: front_traffic_assist_0x41: activated front_traffic_assist_0x41_msg_bus: TERMINAL 15 |
|
- i do not have any description mentioned bit so don't know if correct