Post by lecombattant on Feb 4, 2022 13:53:00 GMT
Hu guys,
First post here to get you help.
Few weeks ago I decided to remove my original halogen H7 bulb to LED from Philips (Ultinon Pro5000 H7) on the low and high beam.
Very happy about this mod.
Work fine, with no error (those LED are canbus).
However, I installe some T10 (always from Philips) for the position and they are not canbus.
So on my dashboard, I get an error to check my bulb.
But yeah still working fine. Just because it's LED, the computer think they are out.
I search on internet but I couldn't find anything concrete about OBDeleven and the fact of switching of the bulb monitoring on the 6C.
My car is 6C Cup from September 2014.
Thank you so much for your help.
Best regards all.
First post here to get you help.
Few weeks ago I decided to remove my original halogen H7 bulb to LED from Philips (Ultinon Pro5000 H7) on the low and high beam.
Very happy about this mod.
Work fine, with no error (those LED are canbus).
However, I installe some T10 (always from Philips) for the position and they are not canbus.
So on my dashboard, I get an error to check my bulb.
But yeah still working fine. Just because it's LED, the computer think they are out.
I search on internet but I couldn't find anything concrete about OBDeleven and the fact of switching of the bulb monitoring on the 6C.
My car is 6C Cup from September 2014.
Thank you so much for your help.
Best regards all.