|
|
Post by No iD3a on Jan 27, 2022 19:46:10 GMT
Is there a setting I've missed to stop this disclaimer screen popping up every time I start the car for 10 seconds or so?
Is it something that can be coded out with OBD11??
Had it in my old Lexus, drove me mad.
|
|
born
New Member
Posts: 5
|
Post by born on Jan 27, 2022 22:09:37 GMT
In Module 8125 / Application Server 3
Choose: Adaption
Search for: Privacy Mode
And activate Suppress privacy mode
This will do the trick, alternatively you can shorten the screen popup from 10 second to anything you like in the same menu.
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 28, 2022 8:18:21 GMT
Hello, By doing this manipulation, there will be more display? but the car still stays online too?
|
|
noyah
New Member
Posts: 11
|
Post by noyah on Jan 28, 2022 10:20:27 GMT
Car is still online.
Remove Welcome/Privacy Screen:
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
privacy_mode, timeout, from 5 s to not_active
Remove exit screen:
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
exit_screen_configuration, exit_screen, from activated to not_activated
|
|
|
|
Post by No iD3a on Jan 28, 2022 22:11:06 GMT
Great, will try that in the morning.
|
|
|
|
Post by No iD3a on Jan 29, 2022 13:26:57 GMT
Perfect thanks. All working well.
|
|
libks
New Member
Posts: 31 
|
Post by libks on Feb 2, 2022 10:31:08 GMT
Damn, SFD unlock is required, and I'm a little it worried about it reguarding possible warranty issues when VW knows about my modification.
Anyone is in my situation?
Cheers!
|
|
|
|
Post by No iD3a on Feb 2, 2022 17:58:59 GMT
I'm pretty sure warranty is only affected if they can demonstrate that something you've done is the cause of the problem needing warranty support?
They can't deny a warranty claim on a faulty window winder just because you took the door card off and upgraded the speakers for example.
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Feb 14, 2022 19:41:05 GMT
Damn, SFD unlock is required, and I'm a little it worried about it reguarding possible warranty issues when VW knows about my modification. Anyone is in my situation? Cheers! I confirm in theory they can't say anything, because it's the functions of the car that are just not or badly programmed for the user, OBDeleven just opens the door to the settings. Volkswagen is well aware For my personal case, I have already coded the car and gone to the garage twice (like you, I was afraid that I would be criticized for having coded the car by myself), the last time in addition for a reparameterization of the rain sensor, they searched for a long time to find a solution with two appointments to finally succeed with VW technical assistance to do the right thing after changing the rain sensor. Finally they didn't see or blame anything in the car about it. Of course if you code your car and you lose all as a result of an error on your part, you may be charged for the reparameterization of the car.
|
|
|
|
Post by ahoh1978 on Jun 3, 2022 11:35:48 GMT
Car is still online. Remove Welcome/Privacy Screen:Control unit: 8125 Application server 3 system 1 infotainment Adaptation: privacy_mode, timeout, from 5 s to not_active Remove exit screen:Control unit: 8125 Application server 3 system 1 infotainment Adaptation: exit_screen_configuration, exit_screen, from activated to not_activated Hi noyah, I just tried this on an ID4 (*) Software V3.0 - with no success. The Adaption and also the options are still available for editing - but nothing changes, the nag screen is still there. Also the pre configured app for changing this point does not work for me. Can you please check? Thanks. (*) ID3 and ID4 has the same Software platform, so I decided not to open a new thread in ID4 subforum. |
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jun 3, 2022 20:24:33 GMT
Hi if it's the same platform and you are sure of your settings it should work. To be sincere with you, I also believed that it didn't work for me too, but in fact after doing the coding and having to get out of the car locked this one, and this time when I got into the car there was no more this screen at startup!
|
|
noyah
New Member
Posts: 11
|
Post by noyah on Jul 9, 2022 19:43:35 GMT
Car is still online. Remove Welcome/Privacy Screen:Control unit: 8125 Application server 3 system 1 infotainment Adaptation: privacy_mode, timeout, from 5 s to not_active Remove exit screen:Control unit: 8125 Application server 3 system 1 infotainment Adaptation: exit_screen_configuration, exit_screen, from activated to not_activated Hi noyah, I just tried this on an ID4 (*) Software V3.0 - with no success. The Adaption and also the options are still available for editing - but nothing changes, the nag screen is still there. Also the pre configured app for changing this point does not work for me. Can you please check? Thanks. (*) ID3 and ID4 has the same Software platform, so I decided not to open a new thread in ID4 subforum. I too have a ID4. Software 2.3. I haven’t been able to check out the 3.0 software yet so I can’t help you there yet unfortunately. |
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jul 9, 2022 20:56:28 GMT
I also have a lot of questions about the upcoming 2.4 update first and 3.0 next.
I asked the question to the support, they are not aware of this update for the moment, they therefore advise, to make a backup which will be useless, if the parameters are reset by factory on the car and programs change
for the moment on my car the code works perfectly since it is done in the settings called Adaptation and not a one-click application which generally disappears after a technical intervention at the garage, for example an overhaul. That's the problem with one-click apps unfortunately. I had the blow when changing the sos module or replacing a sensor in my car and I had to redo the one-click applications that I had done before. So for me the 2.4 update is imminent, I will let you know if I have this screen again at startup and especially if I manage to remove it as before with the procedure described above. For ID.4 users, it may not be the same procedure for you, unfortunately.
|
|
|
|
Post by unikfortytwo on Oct 21, 2022 8:05:20 GMT
Did anyone fix this after upgrade to 3.0 SW?
|
|
|
|
Post by mxcxpx on Oct 23, 2022 12:30:22 GMT
I did the programming, but the changes do not work, there is no change.
I tryed : no active and 2sec .
I have an cupra born with software 3.14
|
|
|
|
Post by kraschandburn on Dec 21, 2022 18:25:43 GMT
I did also the programming, but the changes do not work, there is no change.
I tryed : no active and some more but still no affect.
I have an vw id3, one month old so i guess its the latest software.
Does anyone have some more tips and tricks or ides to get rid of this screen?
//BR
|
|
nesti
Junior Member
Posts: 56
|
Post by nesti on Dec 22, 2022 13:56:09 GMT
I think you need to change this:
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation
privacy_mode
Supress_privacy_mode
change this to active
like it was mentioned in the 2nd post.
close the car, wait a bit until it's in sleep mode or whater´ver the mode is called  and then try again.
let me know if it worked.
|
|
raul
New Member
Posts: 3
|
Post by raul on Dec 23, 2022 7:15:23 GMT
With Software 3.0 we have a changed start screen, is there a solution for this? Because now we have users to select instead offline and online mode and the window popup timer solution is gone.
|
|
|
|
Post by vicros on Jan 10, 2023 13:22:25 GMT
VW has said that the popup should go away by itself and thus adhere to the previous timers, what people are currently having is a bug where it ignores the timer and you have to press OK.
|
|
nesti
Junior Member
Posts: 56
|
Post by nesti on Jan 10, 2023 14:11:14 GMT
Hi, the bug still is in software version 3.2 on the ID.3
|
|
|
|
Post by yurakpi on Jan 10, 2023 18:49:34 GMT
block 8125 - adaptation - function configuration pso - IAA function (now) - OFF
|
|
|
|
Post by daytrader on Jan 11, 2023 21:45:03 GMT
With which software version did you test it? 3.2?
|
|
|
|
Post by daytrader on Jan 14, 2023 21:38:04 GMT
block 8125 - adaptation - function configuration pso - IAA function (now) - OFF I have tested this on an ID5 with SW 3.2. . The start screen disappears, but also the user tile and the Wecharge APP no longer work. So the tip isnt the best solution, I have undone it. |
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on May 14, 2023 19:07:54 GMT
Hi everyone. At the moment 3.2 for the Id family is available at the garage.
Have you tried to make this screen disappear without clicking on Ok?
|
|
|
|
Post by verdomde on Oct 23, 2023 12:30:40 GMT
Hello, anyone heard of any solution to this? It looks like the above makes the app not work? And factory reset then just checking 'don't remind me' and not setting up a user also means the app wont work (until you set up a user). Is there some list of users I can add my name to, so vw fix the bug?
|
|
and then try again.