|
|
Post by soundmangt4 on Jan 18, 2022 17:14:35 GMT
Hi, I need to code my new battery, and have read what I can and watched videos but the menu structure on my OBDeleven Pro seems to be different. When I connect and go to Gateway, I don't have the option for Adaptation, I only have Long Adaption or Long Coding, and they both ask for a channel number??
Anyone got any ideas, it's driving me nuts!
Thanks in advance.
|
|
|
|
Post by soundmangt4 on Jan 18, 2022 17:48:38 GMT
Well, a bt more digging and I have sorted it. Go to Gateway -> Long Adaptiation -> 04 as the channel number, then chage the values to suit new battery. Old Value was as follows: VAR 068 1111111111. VAR is make if battery (Varta), 068 is the Ah value of the battery and the 10 digit number is the serial number. My new battery is exactly the same rating but a Bosch battery. I entered the new value as BOS 068 1111111123 and it accepted it. Long presses stored the value and all seems fine. Hope this helps someone else!
|
|
|
|
Post by burak3806 on Feb 2, 2022 12:27:07 GMT
Thanks for attention. It can help other people.
|
|
