kaja
New Member
Posts: 1
|
Post by kaja on Jan 10, 2022 12:38:31 GMT
How code additional options ( standard cruise control )  See video.
|
|
|
|
Post by Tomas700 on Jan 10, 2022 17:47:11 GMT
Why you need standart cruise control if you have acc?
|
|
timpy
New Member
Posts: 3
|
Post by timpy on Jan 12, 2022 7:30:27 GMT
Especially in winter conditions ACC is sometimes not in use because of snow or ice on front radar. Standard cruise can then be used.
|
|
|
|
Post by keithl on Jan 13, 2022 17:53:58 GMT
So, are going to share how you did this ?
|
|
|
|
Post by pascalvandeloo on Feb 25, 2022 20:28:19 GMT
Control unit 13 Long coding Cruise control mode Set to: Activated Enjoy!!!  |
|
|
|
Post by rr163tlt on Mar 4, 2022 11:24:07 GMT
Does not work for me. Encoding fails. Although it accepts other encodings.
|
|
|
|
Post by keithl on Mar 8, 2022 10:56:41 GMT
I also cant get this to work, the coding fails.
|
|
|
|
Post by pascalvandeloo on Mar 17, 2022 20:46:09 GMT
You have to clear the security code first before coding de cruise control, then it should work.
|
|
jb73
New Member
Posts: 5
|
Post by jb73 on Mar 18, 2022 11:33:09 GMT
It work for me. I'm so happy But everytime you set the speed, you have a message (distance regulation isn't active) And when you start the car, it's ACC by default. I can't find a memory option for this. |
|
|
|
Post by stefflimitless on Apr 16, 2022 10:14:36 GMT
I have no option in Virtual cockpit to change. I have ACC 210km/h standard. Is there any coding in Dashboard to see this? I tried the coding above, without success. No fault message.
|
|
|
|
Post by rr163tlt on Apr 29, 2022 5:05:38 GMT
Also yesterday it turned out to activate a regular cruise. First, I went into the safe access of the control unit 13 and entered the code 20103. After that, the control unit accepted the encoding. ![]() |
|
|
|
Post by stefflimitless on Apr 29, 2022 7:27:30 GMT
I enabled cruise control mode but still not shown in VC. Others said it’s Swap/Fec on my Scala 11/19 Software 0278 and ocu 0139
|
|
999
New Member
Posts: 4
|
Post by 999 on Aug 16, 2022 3:49:14 GMT
do you know how to code "comfort turn signal"? change value 3 to value 5
|
|
|
|
Post by stefflimitless on Aug 16, 2022 5:48:48 GMT
Unit 09->Adaptations->Aussenlicht Blinker->Komfortblinken Blinkzyklen
|
|
|
|
Post by medooo on Sept 14, 2024 20:28:12 GMT
It doesn't work on my analog dashboard. Any ideas, why?
|
|
|
|
Post by medooo on Sept 14, 2024 20:29:10 GMT
Control unit 13 Long coding Cruise control mode Set to: Activated Enjoy!!! It doesn't work on my analog dashboard. Any ideas, why? |
|
See video.
