Post by PdM on Jan 4, 2022 20:40:52 GMT
I am posting only adaptation and long coding as using OBDeleven app is easy.
The magic will happen by adaptation and long coding.
I did specify my car in subject as adaptation and long coding for different types/models/engines may vary.
I hope you will enjoy it.
Audi mode - probably the best upgrade you can do
The car will behave completely different, more smooth on driving, linear on torque, quickier on the start.
The difference between Audi mode and VW mode is huge.
The first step makes the difference, the rest is adding spark to it.
I did not do the fourth step as my ACC worked without adjusting it. Did not show any malfunction.
I did not have in Adaptive cruise control section in long coding - brand logic. There was no such an option.
1. Step
Only ignition on (not the engine)
Engine 01
Long coding
Byte 00
Change to Audi (Byte 00 – 02, HEX 02)
(need to untick first square and than tick the second one)
2. Step
Steering Assistance 44
Adaptation
Driving profile switchover
Change to Direct, controlled over treshold value
3. Step
Brakes 03
Rough road optimization
Change to not activate
4. (only if needed)
Adaptive cruise control
Long coding
Brand logic
Audi
Dashboard modification
Dashboard 17
Adaptation
Display depiction
Version 3
Dashboard 17
Adaptation
Tube version
Variant 3
Variant 0, Variant 1, Variant 2, Variant 4...
I stayed with Variant 3 but Variant 4 is looking good as well.
Closing sunroof by pressing long button
Central electrics 09
Schiebedach
SAD Komfort schliessen
Active
Ambient light 10 colours
Central electrics 09
Int. Light, 2nd generation
Instrumententafelbeleuchtung mehrfarbig
Active
Interior light, light configuration
Ambiente farbliste
Active
Ambientemenue it alle Zonen
Active
Ambient light color list
Set the value for R, G, B using www.rapidtables.com/web/color/RGB_Color.html
Reboot – holding on/off button for 30 seconds and lock the car for 30 minutes.
If you do not see any change after rebooting and switching off the car for 30 minutes, than go to menu - car - setup - factory settings - ambient light and reset it to factory settings, than go to back to ambient light menu and you should see your new configuration.
This I tested for several times and always worked.
Some colours may appear little bit different in led strips than in dashboard.
I did this configuration and like it much:
Ambient light 10 colours:
R/G/B
20/230/210 - cyan
0/139/139 – dark cyan
0/0/255 - blue
153/255/0 - lime
0/128/0 - green
255/198/0 – yellow
255/69/0 – orange
255/20/147 - pink
102/0/51 – dark magenta
90/20/150 - violet
OBD eleven ambient colours.docx (20.22 KB)
