|
Post by jtitzer56 on Dec 26, 2021 2:18:01 GMT
I fitted an Active Info Display in my 2019 GTI Autobahn yesterday and I have one issue that I can't figure out. The ACC is working properly but when it detects a car in front of me it instantly shows it at the bottom of the display rather than it slowly moving to the set distance line. I've looked through the long coding and adaptations in the ACC and dashboard modules but nothing stands out as being settings for that display.
|
|
qube2
New Member
Posts: 6
|
Post by qube2 on Dec 26, 2021 20:56:32 GMT
Hi,
I have had this issue too after retrofitting an AID. The fix:
Control unit: 0x13 Adaptive Cruise Control Long coding: FPK_Functions ( not installed -> installed)
Kind regards
|
|
|
Post by dv52 (Australia) on Dec 26, 2021 22:50:30 GMT
jtitzer56 : As per qube2 , set Byte 4, Bit 3 on the hex13 module (front camera) long-code string Don
|
|