ID.3
Full Member
Posts: 210
|
Post by ID.3 on Dec 24, 2021 10:51:00 GMT
would someone be how to choose how many blinks, for comfort mode ? It is possible to choose between 3 flashes (original) or 4 or 5 flashes on other VAG vehicle versions. But impossible to find or modify in the long coding in module 09 central electrics or in the setting for this function on our ID.3 ? Do you have an idea maybe ?
|
|
noyah
New Member
Posts: 11
|
Post by noyah on Dec 24, 2021 11:17:47 GMT
Comfort indicators, number of blinks
Control unit: 19 Gateway
Adaptation:
Light_control, Komfortblinken Blinkzyklen, number value (says up to 3 but 5 was accepted)
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Dec 24, 2021 11:31:01 GMT
Have you tried on an ID3?
I just searched everywhere in unit 09, I found nothing of what you said 
I misread it in fact I was looking for module 09 when it is the 19th, I hope to find suddenly  |
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Dec 25, 2021 8:57:57 GMT
Hello, I have found in unit 19 ===> Adjustment ===> Light control ===> comfort flashing adjustment value ===> proposes 0 - 3 I put 5 and everything works!
Great thank you very much for your help!
|
|
|
|
Post by dg4prez on Dec 25, 2021 23:40:24 GMT
Gateway
Adaptations
Light_control
Comfort flasher set point ->set to 4
|
|
|
|
Post by mencey on Dec 27, 2021 10:46:56 GMT
Good contribution, thank you.
|
|
|
|
Post by naranzeta on Jan 2, 2022 21:30:16 GMT
I have tried it, it saves the value well but then it does not work, it still gives only 3. do I do something wrong? Do you have to enter any code for the module? any reset? Has anyone tried it and it works?  |
|
|
|
Post by sq3fyk on Jan 2, 2022 21:37:39 GMT
Mayby SFD activation needed ?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 3, 2022 5:45:18 GMT
I don't know if this is related to your error but indeed I had to activate the double check of connection and make a total backup of the configuration of the car. which allows in the event of a crash to make a backup.
Maybe you haven't done it yet?
|
|
|
|
Post by naranzeta on Jan 3, 2022 6:24:43 GMT
I have tried it, it saves the value well but then it does not work, it still gives only 3. do I do something wrong? Do you have to enter any code for the module? any reset? Has anyone tried it and it works?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 3, 2022 15:37:10 GMT
No code entered to access the unit menu 19. I just put the number 5 then validate the operation, originally it is grayed out 0 - 3
I am using the iOS version, however, I don't know if it's really possible with Android, normally in the pro license, if?
|
|
|
|
Post by naranzeta on Jan 3, 2022 15:42:00 GMT
Well, it does not work, I will try coding it with the hood of the vehicle open and then I will see if there is an option to reset the car to factory values .....
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 3, 2022 17:05:45 GMT
|
|
|
|
Post by naranzeta on Jan 3, 2022 20:46:55 GMT
that's it! at the end you have to restore the factory setting, it is already working, the maximum value that it accepts is 5 flashes. the bad thing is that later, you have to configure the whole car again, we connect, wifis and everything!
Thanks!
|
|
|
|
Post by radeon79 on Jan 3, 2022 23:15:40 GMT
hi I have the same problem, did you first set the value to 5 and then restore factory settings on the car or did you first restore factory settings and then set the value ?? What settings have you lost now of the car ??
|
|
|
|
Post by naranzeta on Jan 4, 2022 5:23:15 GMT
I have first set the value to 5, them reset
you have to configure the whole car again .....
|
|
|
|
Post by radeon79 on Jan 6, 2022 16:12:36 GMT
I have received a error for reset to default function (unable to reset default for entertainment message). No problem with your ID.?? The comfort indicator now is ok….
|
|
|
|
Post by naranzeta on Jan 7, 2022 15:47:42 GMT
Yes, it also gave me that error, there is some infotainment value that cannot be reset. in mine everything works fine.
|
|
big
New Member
Posts: 10
|
Post by big on Jan 11, 2022 18:36:36 GMT
Yes needed on ID4. My experience is that Enyaq, id3 and id4 are not identical related to programing. This worked for me   |
|
|
|
Post by camille2 on Jan 12, 2022 15:21:06 GMT
Did you had to do a factory reset after changing the number of blinks?
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Jan 13, 2022 9:38:06 GMT
No no hard factory reset via Discover Pro
|
|
