|
Post by lifeoflucas on Dec 23, 2021 14:17:53 GMT
Hi, I have a 2021 mk7.5 GTI SE (north American) and have had issues with using the apps. I received a Control Module incorrectly coded error U101400 in Central Electronics when I scanned the car, which returns even if I clear the error. I noticed after I got the error, my rear blinkers no longer work in the AUTO setting. I believe the issue came after trying to use the Joker taillights, which failed during the install. Any help will be greatly appreciated. Apologies if there is a thread with this same topic, I couldn't find anything related to my issue. Thanks! This is a screenshot of the error code:
|
|
|
Post by dv52 (Australia) on Dec 24, 2021 19:26:41 GMT
lifeoflucas : Hi. Another victim of one-click-apps!! Their allure is (of course) their ease-of-use, but the problem is that they make changes to the car's coding without leaving any records of these alterations. So, unless everything goes well, there's no information for fault finding!
I guess the first question to ask is: do you have a PRO subscription? If no - then you won't be able to fix this problem manually and I suspect your only recourse is a message to the help-desk
If you do have a PRO account, then the Leuchte-sets on a "Yankee" mk7 that control the rear turn-signals is: - Leuchte20BR LA71 - left side
- Leuchte21BR RC8 - right side
The second question is: did you create a back-up of the hex09 module before using Apps? If yes - compare the values in the Leuchte-sets above with those on your back-up and revert any settings that are different
If you didn't create a back-up, post up pictures of the current values in the 2 x Leuchte-sets and I will have a look. To be clear, I need to see all 19 x adaptation channels for each Leuchte-set
Don
|
|