|
Post by bestsoundever on Dec 23, 2021 11:12:16 GMT
Hello. Anybody knows, how to check if is possibly fraud, rolled down kilometers/miles on the cluster, in vcds you can check on automatic transmission mileage, is any option in obd11 to?
|
|
|
Post by dv52 (Australia) on Dec 23, 2021 20:43:15 GMT
bestsoundever : Hi. There's nothing particularly special about VCDS where this matter is concerned - both OBD11 and VCDS simply read the data that's stored in the control modules. A number of modules keep the mileage information - for example, here's a picture (below) of the mileage record from an Audi A3 8V. The screenshot came from the engine module (@ address hex01) using the Live data option and typing "Distance" into the search box (as shown) - this particular module uses the newer, UDS/ODX protocol. I'm not quite sure of the difference between the 2 x ticked entries in the list shown.
I suspect that: - "vehicle distance driven"= the mileage actually shown on the instrument cluster
- "control module distance driven" =the internal mileage counter inside the module itself
Clearly the 2 x values should be the same number for a legitimate reading!!
Don
|
|