|
|
Post by gianry on Sept 24, 2020 10:01:22 GMT
is it possible to make an adaptation of the DSG7-DQ200 ?
I've an issue in acceleration in 5th or 6 th speed gear. The engine rpm goes up with flounce
the clutch plates are new , changed some month ago.
thanks
|
|
|
|
Post by vicape92 on Oct 1, 2020 23:16:51 GMT
hi ginary,
did you tried finally to perform a dsg reset into dq-200, I have the same and want to do it. Worked well?
|
|
|
|
Post by andywc on May 15, 2021 17:36:57 GMT
That's frustrating.
Three years plus and no fix.
Or otherwise they could at least make it clear with an update to the app that such a procedure is not relevant for the connected car.
Pretty poor show.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 2, 2021 9:49:07 GMT
Just an update after release 39.0 I was just going through my list of open issues and to my supprise on my 2014 car I got it to work using the app, will double check today doing it manually. Does anybody know if this works on the DQ200 Box as I have seen some comments on other forums that this requires different procedures. Last question, again on other forums I have seen notes that suggest that there must be no outstanding errors on the gearbox, could anybody confirm if that is true (as I dont have any but other users do) For those who have not done this before please see below screen shots of process on my 6 speed DSG DQ250 2014 Box
Before you start the process read the rules that dv52 (Australia) Shared previously on this thread so that you have engine running on tickover, Parking and Foot Brake are both pressed, DSG Oil temp is at correct level. Select Control unit 02 Select Basic Settings Select Basic setting of transmission
I also came across this video for the DQ200 DSG Reset
In this video I show how to reset DSG gearbox in 2016 Skoda Superb 1.6 TDI with DSG (DQ200) gearbox. If your gearbox does not work as smoothly, it is jerking or behaving in some unusual way - you can do this reset yourself and see if it will help in anyway - it works for me - it may work for you too  . The written instructions are as follows: 1. Turn the ignition on, without starting the engine. 2. Fully depress and hold the accelerator in that position for about 10-20 seconds (You may hear / feel a click). 3. Release the accelerator and start the engine. (do not turn off the ignition prior to starting the vehicle as it will void the reset).
I have a member on a spanish site who tried the original DV52 Posting and got an error in Basic Settings Status Cancelled due to detected malfunction.
|
|
|
|
Post by memoaudi13a4usa on Dec 4, 2022 18:18:49 GMT
Hello, do you have an Update to do the resetting for this new date on the app?
Please, I would really appreciate it
|
|
|
|
Post by naynesh on Dec 4, 2023 2:56:18 GMT
I am doing the dsg adaptation as my car won’t shift in reverse after doing the rear main seal. When I go to channel 61 in basic settings menu it shows the status as “cancelled”. Please help
|
|
|
|
Post by dv52 (Australia) on Dec 4, 2023 20:18:50 GMT
naynesh : huh......... " channel 61"? This car can't be a MQB platform vehicle because the modules in these cars use the newer UDS/ODX protocols (which do NOT have channel numbers)
I suggest that you ask your question in the correct part of the forum
Don
|
|
|
|
Post by whyahwhya on Dec 24, 2023 4:17:01 GMT
Quick question, when using the 1 click app for "Basic Setting of Transmission" Does the process go through the Highlighted Red?  |
|
|
|
Post by myownname5 on Jan 29, 2024 17:08:12 GMT
I am also wondering if it works on DQ200 (0CW). I assume the values 0-0-4 does not show in the obdeleven menu. But I have read, these values normally show after about 2min(in VCDS).
Then maybe it would be possible to just wait 3 min and then start the engine?
|
|
kargo
New Member
Posts: 2
|
Post by kargo on May 17, 2024 20:28:54 GMT
Any one tried this on DQ200 0AM?
Curious because I hear a clunking noise shifting 1 to 2 or reverse.
|
|
|
|
Post by dmvityalik on Jun 13, 2024 1:27:27 GMT
Can somebody advise please. After I go to basic settings, I don't have the option " basic settings of transmission". I have only  So what should I chose? |
|
|
|
Post by alexish657 on Sept 26, 2024 2:52:14 GMT
have you opened your hood while doing it ?
|
|
pangy
New Member
Posts: 2
|
Post by pangy on Oct 10, 2024 3:37:16 GMT
hey kargo did you ever find a fix for this? |
|
|
|
Post by teogreece21 on Oct 12, 2024 14:09:05 GMT
Hello,if the dsg is tuned from a tuner and we reset the dsg we lose the tune file and adaptations of tuner??
|
|
.
