Post by King on Dec 16, 2021 21:20:13 GMT
Applicable to all models *
Enable 3 custom controller profiles and guest account with separate personal settings. Profiles can be changed from the instrument cluster and infotainment display.
1 - Module 09 - Electronic control unit - Code (31347)
2 - Long coding (Bytes mode)
3 - Byte 8 - (Activate bit 2)
4 - Byte 11 - (Activate bit 4)
5 - Adaptation
6 - Personalisierung
7 - Personalisierung aktiv - (Change value to On)
8 - Aktivierungsoption im HMI menue sichtbar - (Change value to On)
9 - Benutzerkontenverwaltung in HMI menue sichtbar - (Change value to On)
10 - Personalisierungsfunktionen an HMI menue sichtbar - (Change value to On)
11 - Anzahl benutzerkonten - (Change value to 4)
12 - Automatische schluesselzuordnung - (Change value to On)
1 - Module 08 - Air conditioning / heating electronics
2 - Extended coding (Bytes mode) or text mode Personalization (Change value to Enabled)
3 - Byte 15 - (Enable bit 3)
1 - Module 17 - Instrument panel - Code (25327 or 20103)
2 - Extended coding (Bytes Mode)
3 - Byte 10 - (Enable bit 0) or text mode Customization (Change value to YES)
Restart the screen to show the new functions. The settings we have are erased and go back to how they came from the factory. We adjusted and solved again.
They also throw two errors in the scan, we deleted them and scare fixed.
Enable 3 custom controller profiles and guest account with separate personal settings. Profiles can be changed from the instrument cluster and infotainment display.
1 - Module 09 - Electronic control unit - Code (31347)
2 - Long coding (Bytes mode)
3 - Byte 8 - (Activate bit 2)
4 - Byte 11 - (Activate bit 4)
5 - Adaptation
6 - Personalisierung
7 - Personalisierung aktiv - (Change value to On)
8 - Aktivierungsoption im HMI menue sichtbar - (Change value to On)
9 - Benutzerkontenverwaltung in HMI menue sichtbar - (Change value to On)
10 - Personalisierungsfunktionen an HMI menue sichtbar - (Change value to On)
11 - Anzahl benutzerkonten - (Change value to 4)
12 - Automatische schluesselzuordnung - (Change value to On)
1 - Module 08 - Air conditioning / heating electronics
2 - Extended coding (Bytes mode) or text mode Personalization (Change value to Enabled)
3 - Byte 15 - (Enable bit 3)
1 - Module 17 - Instrument panel - Code (25327 or 20103)
2 - Extended coding (Bytes Mode)
3 - Byte 10 - (Enable bit 0) or text mode Customization (Change value to YES)
Restart the screen to show the new functions. The settings we have are erased and go back to how they came from the factory. We adjusted and solved again.
They also throw two errors in the scan, we deleted them and scare fixed.
