Post by dmitryp on Mar 7, 2017 15:04:11 GMT
Hi everybody,
Is there anyway to implement the following using OBDEleven on Android?
>> Go to Module 09-Cent. Elec.
>> - Enter Security Code (shown up by default) (mine was 20113)
>> - Go to Adaptation, Type Channel 34 and hit Read button, it should show the factory default number in value window.
>> - Subtract 4 from factory default number/value to disable Start&Stop every time engine is started, or
>> - Add 32 to the factory default number/value it remember last status.
>> - Test & Save
Can go to "09-Cent. Elec.
".
Can go to "Adaptation". Don't get to choose "Channel 34", see only textual representations.
Can go to "Coding", but can't see Channels, only Bytes.
Can Bytes somehow be mapped to Channels? E.g. Byte 35 (34+1 because of the first byte number 0) is Channel 34?
Anyone?
Or am I missing some feature of OBDEleven. I have a PRO version.
Thank you!
Is there anyway to implement the following using OBDEleven on Android?
>> Go to Module 09-Cent. Elec.
>> - Enter Security Code (shown up by default) (mine was 20113)
>> - Go to Adaptation, Type Channel 34 and hit Read button, it should show the factory default number in value window.
>> - Subtract 4 from factory default number/value to disable Start&Stop every time engine is started, or
>> - Add 32 to the factory default number/value it remember last status.
>> - Test & Save
Can go to "09-Cent. Elec.
".
Can go to "Adaptation". Don't get to choose "Channel 34", see only textual representations.
Can go to "Coding", but can't see Channels, only Bytes.
Can Bytes somehow be mapped to Channels? E.g. Byte 35 (34+1 because of the first byte number 0) is Channel 34?
Anyone?
Or am I missing some feature of OBDEleven. I have a PRO version.
Thank you!