Problem re-activating Driver Steering Reccomendation

Hello,

I have a 2016 Audi S4.  I followed some popular advice on several Audi enthusiast forums to disable DSR to help address some steering feel.  I have decided that I am not getting the desired effect, and would like to re-enable DSR.

The problem I have is that when I set DSR back to active and try to apply the change, I get the error: "(22) Function Cancelled, Marginal conditions have not been set."

Steps that I took to disable DSR:
Steering Assistance(44) > Long Coding > DSR active to non-active > Apply

Steps that I am attempting to take to enable DSR:
Steering Assistance(44) > Long Coding > DSR non-active to active > Apply

I am performing this with the ignition ON, engine OFF.  If I try to perform this with the engine on, I get a different error; the long coding helper states to perform with engine off regardless.

I have also tried to make this change by setting the long coding value BACK to 10000001001 from 00000001001, as the car history shows this was what was changed when I made the original modification.  I get the same error.

I have attached the log for my car incase it can provide some insight.

Any help is greatly appreciated, thank you.

SJS4 OBDEleven Car Log.txt (17.39 KB)