|
Post by help hand on Mar 5, 2017 12:16:36 GMT
Hello, has anyone informations if it is possible to activate parkassistant,when all sensors in front and back are installed ? My GTD (2014) has OPS with Rear view and all Sensors eccept the Switch to activate the Assistant. When the missing Schwitch (5G1927238F) has been installed where must i a activate the Funktion ?
|
|
|
Post by dv52 (Australia) on Mar 5, 2017 23:00:29 GMT
help hand: the answer to your question really depends on what equipment has been installed from the factory. Starting point (I guess) is whether the control module @ address hex76 is fitted and registered with the Gateway module. Does the control module list for your car show the Parking Assistance module as per the screen below? Don
|
|
|
Post by help hand on Mar 6, 2017 16:44:26 GMT
Yes Entry 76 is availible and green.
|
|
|
Post by dv52 (Australia) on Mar 6, 2017 22:26:56 GMT
Yes Entry 76 is availible and green. help hand: OK-that's a good start: create a Back-up file for the address hex76 module and post it here so we can see how it's configured Don
|
|
|
Post by help hand on Mar 8, 2017 16:20:56 GMT
|
|
|
Post by dv52 (Australia) on Mar 8, 2017 23:00:46 GMT
^^^^^^^^^^^ OK, my bad. What you have provided is a list of pictures for the code-string on the park assist module. What I meant by the term "Backup" was using OBD11's facility as per the screen-shots below -the pictures show the process for the central electrics module, but it's the same for the module@ address hex76. Incidentally, I seriously suggest that you repeat the "Backup" process for ALL the control modules in your car before you start making changes. Having a fulsome database of these settings on you laptop will be invaluable when (not if) a tweak change goes pear-shape. Don
|
|
|
Post by help hand on Mar 9, 2017 5:12:36 GMT
Sicherung Steuergerät: 76 Einparkhilfe Systembeschreibung: PARKHILFE 8K Software-Nummer: 5Q0919294E Software-Version: 0048 Hardware-Nummer: 5Q0919294A Hardware-Version: H03 Seriennummer: 39331417804114 ODX Name: EV_EPHVA18AU3700000 ODX Version: 002024 Name der Sicherung: einparkhilfe Lange Codierung: 0031151011 Anpassungen: Lautstärke Lautsprecher für Einparkhilfe hinten: Stufe 6 Frequenz Lautsprecher für Einparkhilfe hinten: Stufe 4 Lautstärke Lautsprecher für Einparkhilfe vorn: Stufe 4 Frequenz Lautsprecher für Einparkhilfe vorn: Stufe 6 Anforderung Audioabsenkung: ein Aktivierungston für Einparkhilfe: ein Abschaltgeschwindigkeit für Einparkhilfe: 10 km/h Produktionsmodus: deaktivieren Produktionsmodus deaktivieren: deaktivieren Kilometerstand: 56420 km Datum: 2017-03-07 16:28
|
|
|
Post by dv52 (Australia) on Mar 9, 2017 5:43:12 GMT
help hand: Thanks for the back-up file - all good in the module, so no changes needed there.
Next - check that the following adaptation channels are ALL set to active in the Information Control Unit 1 module @address hex5F:
Vehicle function list BAP-parking_assist_0x0A Vehicle menu operation-menu_display_pdc Vehicle menu operation-menu_display_pdc_over_threshold_high
Don
|
|
|
Post by help hand on Mar 9, 2017 16:15:59 GMT
Hello Don, Thanks for your help so far.
menu_display_pdc_over_threshold_high: aktiviert menu_display_pdc: aktiviert parking_assist_0x0A: aktiviert
by the way - the missing PDC Switch will be coming soon. So i can´t test any codings.
|
|
|
Post by prezmo on Mar 9, 2017 19:56:11 GMT
FYI,
In Superb Sportline (production 5W 2017) the 76 driver is available, the backup shows as "OK" but with 0%. When I enter the adaptations, I get the error message "Something went wrong, try again".
|
|
|
Post by help hand on Mar 16, 2017 18:30:47 GMT
The PLA switch is mounted now. Any suggests how to go on? Switch lights white but no other function.
|
|
|
Post by dv52 (Australia) on Mar 16, 2017 22:29:34 GMT
help hand: OK - it would be great if just plugging-in the switch module was all that's necessary, but alas it ain't that simple! I suspect that the wiring loom in your car doesn't have the "Parking aid" wires from the switch (E266), or the warning light (K136) back to the control module. see below Don
|
|