|
|
Post by albat6 on Nov 28, 2021 17:24:51 GMT
Does anyone know if it is possible to activate this? In the UK at least the auto function only comes with the matrix lights but the manual describes it for the standard led lights. So I suspect it may be possible. Grateful for any insights.
Thanks
|
|
|
|
Post by tigers on Dec 1, 2021 0:08:21 GMT
There's a topic on how to do that in the ID.3 forum. If I understand correctly it should be no different for the Enyaq. Was planning to try it myself.
|
|
|
|
Post by albat6 on Dec 1, 2021 19:46:35 GMT
Cheers, I'll hunt that down
|
|
|
|
Post by tigers on Dec 3, 2021 8:38:39 GMT
For anyone that may stumble into this in this forum I can confirm that the ID3 procedure works.
|
|
|
|
Post by earnestshackleton on May 21, 2022 14:10:33 GMT
Hi - Can you tell me if your car has standard LED front headlights and you were able to activate high beam assist by additional coding only?
Thanks
|
|
|
|
Post by marcozborn on Oct 1, 2022 13:39:31 GMT
For anyone that may stumble into this in this forum I can confirm that the ID3 procedure works. I tried in my Cupra Born, firmware 3.0, and don't work. Could you write here the correct method? Thanyou |
|
|
|
Post by nitrotg on Oct 7, 2022 15:58:48 GMT
have the matrix light but have to enable auto beam each time i turn on the car.. will this also change that?
|
|
|
|
Post by tigers on Oct 30, 2022 19:44:15 GMT
Yes, there’s an option to keep it always active at restart. If I remember correctly it also adds a menu option for that.
|
|
