|
|
Post by mencey on Nov 26, 2021 12:38:31 GMT
Steps: STG A5 - long coding - byte 05 (coding light assist Afs) - Factory: Hex 01 = no light assistance - Coded: Hex 05 = high beam assistant STG 19 - adaptation - High beam assistant - High beam assistant menu control to "available" (probably optional, but FLA can be (de)activated with it) - optional: switch off the high beam assistant reset, then FLA remains active - Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF) The latter doesn't quite match in terms of name and function, but it works very well ... Translated with www.DeepL.com/Translator (free version) |
|
noyah
New Member
Posts: 11
|
Post by noyah on Nov 28, 2021 16:57:33 GMT
STG 19 - adaptation - Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF) The latter doesn't quite match in terms of name and function, but it works very well ... Translated with www.DeepL.com/Translator (free version) Not sure I follow the last step, can’t find Light Control in adaptation STG 19. |
|
|
|
Post by geniusve on Nov 30, 2021 18:22:13 GMT
Hope this will help you. try to search "Lichtsteuerungsmodul" 
Thanks mencey, it worked for me! ID.3 Pure 45 + Comfort Pack |
|
|
|
Post by mencey on Dec 1, 2021 16:57:03 GMT
What model of ID.3 do you have?
I hate people who come on the forum, copy someone else's hard earned code and give no feedback !!!!
Neither what model of ID.3 you have nor if it works or works with any problem. That's why this kind of forums end up dead.
|
|
|
|
Post by albat6 on Dec 2, 2021 8:34:22 GMT
Happy to confirm this worked fine on a Škoda enyaq iv60 👍
|
|
|
|
Post by mencey on Dec 2, 2021 9:28:02 GMT
Ok thanks albat6, for the feedback, and the use of your time in testing this coding, best regards.
|
|
|
|
Post by tigers on Dec 3, 2021 9:01:08 GMT
[...]
STG 19 - adaptation
- High beam assistant - High beam assistant menu control to "available" (probably optional, but FLA can be (de)activated with it)
- optional: switch off the high beam assistant reset, then FLA remains active
- Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF)
[...]
Can someone please elaborate on that "optional" part: does it mean that the assistant stays on even when restarting the car but can still be enabled disabled by the lever? |
|
noyah
New Member
Posts: 11
|
Post by noyah on Dec 3, 2021 19:39:50 GMT
Testing your work on an ID4 Pro Performance.
I see the new icon with (A) inside but have not been able to see if the actual function works yet.
I’ll update when tried and tested further.
Thanks for your work and for sharing it!
|
|
|
|
Post by tanton on Dec 4, 2021 13:47:53 GMT
[...
Can someone please elaborate on that "optional" part: does it mean that the assistant stays on even when restarting the car but can still be enabled disabled by the lever? When activating it for the first time, you need to push the light lever forward to get the (A). With this setting, (A) is always active at start of each trip. |
|
noyah
New Member
Posts: 11
|
Post by noyah on Dec 4, 2021 19:32:55 GMT
Works great on my ID4!
|
|
|
|
Post by dg4prez on Dec 8, 2021 2:31:15 GMT
What model do you have and what country? I've been trying to get this to work on my USA pro s and it just doesn't want to take. edit: nevermind, i just realized i misread this and it's for non matrix headlights.
|
|
id4
New Member
Posts: 3 
|
Post by id4 on Dec 17, 2021 9:12:44 GMT
Hi!
I have some problems with this.
Can somebody check, what is default in:
19, adaptions:
High beam assistance:
menuesteurung fernlichtassistent werkseinstellung
Present or not present?
My proplem is A5 long coding - byte 05 (coding light assist Afs)
My ID4 has there 81 (not 01) and chosen bytes are bit0 and bit7.
Is there any possibilities to find out why it is like that?
|
|
|
|
Post by mencey on Dec 23, 2021 12:48:46 GMT
Configuracion de Byte 05 bit a bit  |
|
|
|
Post by suwidah on Dec 24, 2021 5:26:12 GMT
Steps: STG A5 - long coding - byte 05 (coding light assist Afs) - Factory: Hex 01 = no light assistance - Coded: Hex 05 = high beam assistant STG 19 - adaptation - High beam assistant - High beam assistant menu control to "available" (probably optional, but FLA can be (de)activated with it) - optional: switch off the high beam assistant reset, then FLA remains active - Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF) The latter doesn't quite match in terms of name and function, but it works very well ... Translated with www.DeepL.com/Translator (free version) What do these mean AFS, FLA, GLW and MDF? Im new to this 😅 |
|
hr35
New Member
Posts: 1
|
Post by hr35 on Dec 24, 2021 23:52:31 GMT
Please, could you explain what this function adds?
|
|
|
|
Post by albat6 on Dec 28, 2021 15:50:44 GMT
[...]
STG 19 - adaptation
- High beam assistant - High beam assistant menu control to "available" (probably optional, but FLA can be (de)activated with it)
- optional: switch off the high beam assistant reset, then FLA remains active
- Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF)
[...]
Can someone please elaborate on that "optional" part: does it mean that the assistant stays on even when restarting the car but can still be enabled disabled by the lever? Not at all, thank you for doing the hard work and figuring it out. |
|
|
|
Post by mencey on Dec 29, 2021 18:03:53 GMT
.
|
|
|
|
Post by sq3fyk on Jan 2, 2022 18:31:43 GMT
- Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF) Is activated with IQ Lights lamp i read this adaptation from model with factory installed , at the Moment i working about retrofit standard Led headligts to iq lights After coding it i have Dynamic light assist in the menu  |
|
|
|
Post by oleksandr312 on Sept 27, 2023 11:21:34 GMT
STG 19 - адаптация - Модуль управления светом: управление дальним светом, расширенным до "AFS, FLA, дальнего света (GLW, MDF). Последний не совсем соответствует названию и функциям, но работает очень хорошо... Переведено с www.DeepL. com/Переводчик (бесплатная версия)
2. Выберите «Длинное кодирование»
3. Выберите «AFS кодирование Light Assist»
4. Выберите «Ассистент дальнего света»
5. Нажмите и удерживайте, чтобы внести изменения
6. Время блокировки управления 19
7. Выберите «адаптация»
8.выберите «Lichtsteuerungsmodul»
9. выберите «AFS, FLA, дальний свет (GLW, MDF)»
10. нажмите и удерживайте, чтобы применить изменения |
|
mvz
New Member
Posts: 30
|
Post by mvz on Oct 23, 2023 18:19:27 GMT
Can anyone tell me what the stg 19 access code is? I successfully do the long coding in A5, but it won't let me make changes in 19. I also tried entering with the bonnet open.
|
|
|
|
Post by wakhack on Oct 29, 2023 18:19:24 GMT
- Light control module: high-beam control extended to "AFS, FLA, high-beam (GLW, MDF) Is activated with IQ Lights lamp i read this adaptation from model with factory installed , at the Moment i working about retrofit standard Led headligts to iq lights After coding it i have Dynamic light assist in the menu Hello friend Did you bring headlight works ? I try retrofit afs headlight to my ID4 but not succesfull yet |
|
loop
New Member
Posts: 1
|
Post by loop on Dec 4, 2023 18:34:12 GMT
Hi! I can make the first part on A5 but I don't have the "Lichtsteuerungsmodul"... I can activate it?? Thank! |
|
noicl
New Member
Posts: 2
|
Post by noicl on Jan 13, 2024 20:33:01 GMT
I have problems activating Light Assistant with ME3.7
Did anyone have success with this SW?
Thanks
|
|
|
|
Post by malakudi on Jan 18, 2024 15:46:10 GMT
I activated light beam assist for non-matrix lights on ID.3 Pro 2021 with software 3.2. Thank you mencey
|
|
|
|
Post by malakudi on Jan 19, 2024 10:49:01 GMT
Is the following change needed for dynamic headlights? It changes the vertical headlight level from manual to automatic.  |
|
