|
|
Post by garywjr86 on Nov 25, 2021 6:25:19 GMT
IOS or Android user? If Android you might need to clear the app data. If IOS then when connected and SFB unlocked you can check SFB status on live data to see if it is in fact unlocked. It can be hit n miss sometimes, il try on my mk8 today see if it works and let you know
|
|
|
|
Post by garywjr86 on Nov 25, 2021 23:51:10 GMT
If one click app doesn’t work for lane assist memory you could try the below which works through long coding. Very easy to do.
Here is the coding and process.
- Start ignition and turn off Lane Assist using button
- Pop the bonnet handle to release the bonnet (you do not need to raise the bonnet fully).
This is important otherwise the coding will not ‘write’ and you get a failed write message.
- Plug in OBDeleven dongle into one port (located underneath drivers right side trim)
- Turn ignition on (engine does not need to be running)
- Launch OBDeleven on phone
- Code as follows:
- go to A5 Driver Assistance control unit
- then Long coding tab
- scroll down to Configuration for lane departure warning Kl15
- Change from default ‘Activated’ to ‘Last Setting’
-Slide to write coding
- Coding accepted and default is now set to ‘Last setting’
- A few ignition starts to test and Lane Assist should now deactivated by default at ignition startup.
|
|
drg
New Member
Posts: 14
|
Post by drg on May 12, 2023 8:54:14 GMT
Thanks that man, worked a treat
|
|
