|
|
Post by boxster1965 on Nov 24, 2021 9:25:11 GMT
Morning guys
I should have read the forum before using my new OBD11.
I tried to do the teardrop app and now I have no Auto lights and wipers 🤦
Please could someone be kind enough to talk me through how to rectify my mistake🤷♂️
I’m not at all good with technology, so please make it very simple for Simon. 🤣🤣🤣
Many thanks
Simon
|
|
|
|
Post by haider on Feb 17, 2024 19:43:01 GMT
Did u get any luck with this issue as i have the same problem now.
|
|
|
|
Post by farish3000 on Feb 19, 2024 22:40:29 GMT
Morning guys I should have read the forum before using my new OBD11. I tried to do the teardrop app and now I have no Auto lights and wipers 🤦 Please could someone be kind enough to talk me through how to rectify my mistake🤷♂️ I’m not at all good with technology, so please make it very simple for Simon. 🤣🤣🤣 Many thanks Simon Did you not create a backup |
|
|
|
Post by darius14 on Mar 30, 2024 4:30:26 GMT
Hi to you and everyone else who will have this issue. I read through countless forums to try and find the answer and I ended up taking codes of other A1's and S1's and comparing the long coding in the central electrics to finally figure out how to fix this issue.
go to
cent. elec 09 - Long Coding - Byte 21 and change the bit value to EF - This will bring back your wipers and your headlights will stop having an error.
I also had to go in and do the basic settings for the headlights via module 55. Just go Basic setting > Basic Headlamp setting - Activate for 5 seconds then stop then go Acknowledge basic settings - activate for 5 seconds then stop and then clear all codes.
I hope this helps.
Regards,
Darius
|
|
