iiii
New Member
Posts: 5
|
Post by iiii on Nov 19, 2021 4:00:26 GMT
hello...i searched but i cant find it....how can i turn this off and i have problem with coming/leaving home...when i unlock the car the lights are on but when i lock the car the lights are off but on obdeleven i set it up as on
what can be the problem
thanks
|
|
|
|
Post by dv52 (Australia) on Nov 19, 2021 10:05:11 GMT
iiii: hmm..... can you explain your wants again, please - but this time use different words!! I don't understand- what do you want to turn-off (the cornering lights, Leaving home, or coming home)? Don
|
|
iiii
New Member
Posts: 5
|
Post by iiii on Nov 19, 2021 15:38:56 GMT
sorry...i want to disable cornering light
and enable coming home
|
|
|
|
Post by dv52 (Australia) on Nov 19, 2021 21:10:41 GMT
So - to enable the Coming Home CH function, do this: - Fire-up OBD11 software and connect to the dongle
- Navigate to Central Electrics module @ address hex09
- Select Security Access
- Enter the magic number 31347
- Select Adaptation
- Search for "uebergreifend" and select Außenlicht_uebergreifend
- Change the following channels as shown:
- Coming Home Leuchten (Coming home lights) > Low beam (select whichever front lights you want from the options)
Coming Home Verbaustatus (Coming Home initiation method) > automatic
Coming-home Einschaltereignis (Coming-home power-on event) > Driver door
Leaving-Home Verbausstatus (Leaving-Home status) > Enabled
Menueeinstellung Cominghome (Menu Setting Coming home)> 20 seconds (you can change this time later in the MENU)
Menueeinstellung Leaving-home Zeit per BAP (Menu setting Leaving-home Time per BAP) > 60 seconds (you can change this time later in the MENU)
Menuesteuerung Coming Home Werkseinstellung (Menu control Coming Home Factory setting) > active (you can change this later by removing the tick for LH in the MENU)
Menuesteuerung Leaving-home Freischaltung per BAP (Menu control Leaving-home Activation via BAP) > active (you can change this later by removing tick for LH in the MENU)
This procedure sets-up the basic CH function (assuming that your car has the light-sensor on the windshield). Switch-ON for CH is triggered by the channel that has the setting "driver door" - meaning when the driver door opens, CH is initiated. The switch ON period for CH is set by the "20 second" value - this timing starts counting-down after the last door on the car is closed (including the hatch/boot-lid) After you have this facility running correctly, you can then "add" more lights into the CH/LH activity by modifying the appropriate Leuchte-sets with the Leuchte- command Coming Home oder Leaving Home aktiv
Good luck! Don
|
|
iiii
New Member
Posts: 5
|
Post by iiii on Nov 21, 2021 15:55:35 GMT
thank you it works now...
and do you have settings for corner light off
|
|
|
|
Post by dv52 (Australia) on Nov 21, 2021 20:22:56 GMT
iiii : If you want to remove the "Static Cornering Lights" function from the fog-lights, do this: - search the Lichtfunktion channels in Leuchte13NL RB5 for the Leuchte-command Abbiegelicht rechts and change to not active.
- Then search Lichtfunktion channels in Leuchte12NL LB45 for Abbiegelicht links and change to not active
Don
|
|
