|
|
Post by markonie on Nov 18, 2021 22:55:00 GMT
|
|
|
|
Post by philld on Nov 19, 2021 6:59:08 GMT
I just press the 'View' button on my steering wheel!?
If you mean activating the views:
Control Unit 17 > Adaptations > View activation
I believe it's View 3 and 4 you need to activate, but I can't confirm.
|
|
|
|
Post by markonie on Nov 19, 2021 21:35:11 GMT
View 3 or 4 gives the default view with only the car in front with the ACC distance, like in the image below. What I would like to see is the other traffic around. Maybe there is a setting to be turned on  |
|
|
|
Post by massimo23 on Nov 19, 2021 22:53:26 GMT
Do you have Side assist? If not then you only get the front view because to see traffic behind and on each side only the side assist radars can give the information to the Travel assist View…
|
|
|
|
Post by golferen on Nov 19, 2021 22:57:36 GMT
First of all you should turn on Travel Assist with the button on steering wheel, it should show vehicles in front of you, if you don't have side assist then you would not see car behind
|
|
|
|
Post by newty on Nov 19, 2021 23:28:16 GMT
Adjacent lanes display is controlled by predictive Route data (and likely the dataset of the camera).
So when the navigation is not broadcasting the info that you are driving on a multi lane "highway" road, you will not see other lanes even with travel assist active.
There are countries which miss this information at all, so there you will never see this until the map gets more detail.
There is no coding besides the assistance view to be done
|
|
|
|
Post by philld on Nov 20, 2021 20:05:13 GMT
Pretty sure this is wrong.
I don't have navigation activated (I have the 10" screen but without navigation) and when I activate Travel Assist I am shown all lanes with adjacent cars and trucks etc.
|
|
|
|
Post by markonie on Nov 20, 2021 20:44:24 GMT
I really don't know why I can't get the other lanes shown, I have Style edition, discovery pro, Travel assist activated, front assist, side assist.
Did you activate Travel Assist in Adaptive Cruise Control -> Long Coding -> Travel Assist? Otherwise maybe there is something that needs coding in the Driver Assistance (A5) unit.
|
|
|
|
Post by newty on Nov 20, 2021 21:35:10 GMT
Pretty sure this is wrong. I don't have navigation activated (I have the 10" screen but without navigation) and when I activate Travel Assist I am shown all lanes with adjacent cars and trucks etc. Happy to be proven wrong, but the ready2discover units are full featured navigation units, coming with all the software, downloading maps, broadcasting psd and so on, just not showing you all the navigation menus. Otherwise, you could not activate navigation with the swipe of you credit card at once. To proof my point: Do the adjacent lane show up in your car in all multi-lane roads or just designated highways? In case it is only showing up on highways, something - like PSD from the navigation - must tell the travel assist that the multi-lane-view is good to go! I really don't know why I can't get the other lanes shown, I have Style edition, discovery pro, Travel assist activated, front assist, side assist. Did you activate Travel Assist in Adaptive Cruise Control -> Long Coding -> Travel Assist? Otherwise maybe there is something that needs coding in the Driver Assistance (A5) unit. Sure, travel assist ist active in the ACC. There is plenty of stuff in the camera's dataset we cannot change But lets fetch some more information: Which country are you from? What radio/navigation do you have? |
|
|
|
Post by philld on Nov 21, 2021 15:42:16 GMT
Pretty sure this is wrong. I don't have navigation activated (I have the 10" screen but without navigation) and when I activate Travel Assist I am shown all lanes with adjacent cars and trucks etc. Happy to be proven wrong, but the ready2discover units are full featured navigation units, coming with all the software, downloading maps, broadcasting psd and so on, just not showing you all the navigation menus. Otherwise, you could not activate navigation with the swipe of you credit card at once. To proof my point: Do the adjacent lane show up in your car in all multi-lane roads or just designated highways? In case it is only showing up on highways, something - like PSD from the navigation - must tell the travel assist that the multi-lane-view is good to go. Ready2Discover, that's the name  My Travel Assist (with Ready2Discover) shows everything: Highway = Multiple lanes + other traffic. Landstraße = Detects lane type (dotted line or fahrstreifenbegrenzung) Detects the type of shoulder to the right (ie. Curb, grass) + Car in front. Normal city road = Detects lane type (dotted line or fahrstreifenbegrenzung) Detects the type of shoulder to the right (ie. Curb, grass) + Car in front. I should mention I also have the IQ lights = The big camera. My point is, that I believe the big camera is needed to display the advanced travel assist functions. |
|
|
|
Post by markonie on Nov 21, 2021 20:30:56 GMT
Netherlands,   |
|
|
|
Post by markonie on Nov 21, 2021 22:22:01 GMT
To prevent me to overtake from the right sometimes a second lane with a vehicle on the left is shown on the dashboard (Highway). As soons the overtake situation is over it returns back to a single lane with only 1 car in front for the ACC on a multiple-lane highway.
So the camera can detect a second lane and vehicle, it also detects all the road signs.
I can also see the lane type, dotted, curb + car in front etc.
I don’t have IQ-light, doesn’t know if only cars with IQ-light have the bigger camera.
Do you know where I can figure out if my Tavel Assist is also equipped with Ready2Discover?
|
|
|
|
Post by philld on Nov 22, 2021 7:15:38 GMT
Netherlands, Do you know where I can figure out if my Tavel Assist is also equipped with Ready2Discover? Ready2Discover is the 10" infotainment unit prepared for navigation but not activated. Does your car have built in navigation? |
|
|
|
Post by markonie on Nov 22, 2021 18:31:20 GMT
Yes my car has build in navi, also 10 inch. Don't know where to look for the solution.
|
|
|
|
Post by joshua1 on Mar 30, 2022 19:41:51 GMT
When i use Travel assist on the UK on the dual carageways ( 70mpg ) 2 lane roads, it only displays the 1 road, when I got onto the motorways, 3 lane roads, it will update and show all 3 lanes
whish it would show the 2/3 lane all the time, rather then just 1 lane
|
|
|
|
Post by EsEs26 on Jul 28, 2023 5:33:01 GMT
Does anybody know how to change the dashboard view like in these pictures. My travel assist is activated.   Hi, I was researching the same issue. I saw the thread you opened. Did you manage to see the traffic information around? |
|
|
|
Post by melkool on Jul 28, 2023 6:55:38 GMT
on my MK8 I have the 10" display but initially it was with NO navigation (and no road sign detection). Traveled a lot on highways but never showed me 2-3 lanes. Only one lane and the car in front of me. After purchasing the Navigation from shop for a stunning ~660 euros I still not have the TSR (road sign) but now on all highways it's showing me 3 lanes and traffic in front on all lanes. As I don't have Rear Traffic nor Lane Change Assist I cannot see anything from behind.
Later edit: 3 lanes only if I'm in the middle lane - and the highway has 3 or more. If i'm next to the shoulder only 2 lanes and also if I'm in the left lane. On "highways" that have only 2 lanes only 2 are visible.
|
|
|
|
Post by EsEs26 on Jul 28, 2023 7:10:32 GMT
Thank you very much for the information.
|
|
