big
New Member
Posts: 10
|
Post by big on Nov 16, 2021 14:04:55 GMT
Vehicle:
VW ID4 2021
App name:
Automatic Passenger Mirror Dip
Description:
Today one need to move the selector knob from always default "off" to “R” on the driver door to enable dipping of the
passenger mirror, every time one start/put the car in reverse.
Can possible solution be:
- Aut. enable switch set to R when turning engine on (unless the switch automatically turns off after a set time when driving)
- Override R switch to enable automatic dipping when car in reverse. (restore to default at set speed fwd.).
Control unit:
Unknown
Function:
Adaptation ?
Procedure:
Unknown
|
|
|
|
Post by littlebugger25 on Nov 17, 2021 12:29:53 GMT
One click app is available on the Skoda Enyaq already.
|
|
big
New Member
Posts: 10
|
Post by big on Nov 17, 2021 15:24:17 GMT
That is nice to know, but i am not able to use Enyaq as OBD11 Pro detects ID4 ? So hopefully they can copy it to ID4 soon.
|
|
|
|
Post by littlebugger25 on Nov 18, 2021 11:36:51 GMT
Yes I hope so to. There are a lot of apps on the platform ID3/ID4/Enyaq available. Its basicly copy paste I think.
|
|
|
|
Post by One-Click apps developer on Nov 19, 2021 13:36:42 GMT
Hello,
Thank you for the request. The app "Mirror Dip" has been added. Please try, and give us feedback.
Best regards
|
|
big
New Member
Posts: 10
|
Post by big on Nov 23, 2021 15:29:52 GMT
1 Click App is not working.
Mirror dip was pre-programmed with a position and worked in reverse moving the selector to R, which I wanted to avoid.
After using received App, going through SFD protection, changing from "Original" to "ON", going through the instructions in the App, there is no changes.
Shutting down, leaving the car, reenter, start the car and set the selector in Reverse.
The mirror will not move before i move the selector switch on the door to R.
Also tried to Reset the system, without any help.
Am I doing something wrong ?
Info from App History :
Name : Mirror dip
Old value : Original
New value : ON
Todays Date
Can you indicate where this 1click app executes changes ?
Maybe i also need to do some changes elsewhere ?
There are som faults, but assume they are not important
Full Scan
Control units: 45
Fault count : 29
|
|
|
|
Post by littlebugger25 on Dec 15, 2021 15:33:27 GMT
Check this video
|
|
big
New Member
Posts: 10
|
Post by big on Dec 27, 2021 6:38:47 GMT
I want everything to be as earlier VW cars, "Automatic". I do not see the need to select "R" everytime i set the car in reverse.
|
|
drago
New Member
Posts: 4
|
Post by drago on Feb 1, 2022 11:19:49 GMT
Hello,
Is there any option this app to be modified, or as an option, so that it automatically readjust the mirror to normal position and provide appropriate backward visibility when driving away without the need to exceed 15km/h.
|
|
|
|
Post by One-Click apps developer on Feb 3, 2022 15:02:36 GMT
Hello,
is everything done according to the instructions in the application?
1) Switch ignition ON.
2) Enable mirror dip via car display.
3) Set mirror switch to R.
4) Engage R gear.
If the mirror is not dipped down you must yet:
5) Manually move the mirror to the position that must be stored.
6) Engage P gear.
7) Switch ignition OFF.
Now test mirror dip functionality.
|
|
