Post by sigi on Nov 15, 2021 17:36:45 GMT
Hi everyone,
I've waited a long time for SFD support so i signed up for the beta testing as soon as the e-mail came in, now i've finally found the time to make a post about the things i've found :-)
In my opinion, most of these things here should be common knowledge if you mess around with coding, be aware of the fact that not knowing what you are doing can harm your car!
Central electrics adaptations:
things i've tried regarding comfort flasher (even the app) and leuchte channels are not working for me, i keep getting an error, support and OBD11 engineers are looking into it.
Dashboard longcoding tweaks: (easy as the byte's are labeled)
these 3 things can also be found in adaptations, along with some others, but i haven't been able to change them (same error as in cent. elec.)
i also looked around for traffic sign recognition but haven't figured it out yet, some channels have changed since previous models...
I've waited a long time for SFD support so i signed up for the beta testing as soon as the e-mail came in, now i've finally found the time to make a post about the things i've found :-)
In my opinion, most of these things here should be common knowledge if you mess around with coding, be aware of the fact that not knowing what you are doing can harm your car!
Central electrics adaptations:
Daytime running lights:
'Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten' deactivates DRL when parking brake is on
'Tagfahrlicht-Dauerfahrlicht aktiviert zusaetzlich Standlicht' DRL with rear lights (the so called scandanavian DRL)
'Tagfahrlicht Aktivierung durch BAP oder Bedienfolge moeglich' option in the MMI to switch DRL on and off
'Tagfahrlicht nur in Schalterstellung AUTO' DRL only when lightswitch is in auto (deactivate this and the DRL stay on with switch in the off position)
Headlamp washer system:
'SRA Verzoegerungszeit' delaytime for the headlight washer in ms (mine is on 2500 so 2.5sec)
ZV Quittierungen: (acknowledgement signal when locking)
'Quittierton_beim_zweiten_ZV_AUF_Befehl' beep ONLY at second unlock command
'Quittierton_beim_zweiten_ZV_ZU_Befehl' beep ONLY at second lock command
'Quittungston_ueber_hupe' beep using horn (if you don't have alarm system)
'Quittungston_hmi_einstellbar' option in the MMI to turn beep on/off
'Quittierungston_bei_entriegeln' beep at unlocking
'Quittungs_ton_bei_verriegeln' beep at locking
things i've tried regarding comfort flasher (even the app) and leuchte channels are not working for me, i keep getting an error, support and OBD11 engineers are looking into it.
Dashboard longcoding tweaks: (easy as the byte's are labeled)
'engine_data_display' shows power and torque display
'Acceleration display' shows g-meter (i can have it active but it stays at 0G so i might be missing some hardware for it to work)
'Lap counter' shows lap counterthese 3 things can also be found in adaptations, along with some others, but i haven't been able to change them (same error as in cent. elec.)
i also looked around for traffic sign recognition but haven't figured it out yet, some channels have changed since previous models...
