|
Post by hommebrus on Nov 9, 2021 8:25:06 GMT
Hi. I want to be able to connect to bluetooth to my car and for it to be integrated to the cars media system. So i found the re-STREAM CAN bluetooth adapter kit. (Links to produkt: www.eftermontering.se/musik-interface/745-bluetooth-aux-for-audi-concert-symphony.html re-stream.no/product/re-stream-can/ ) and on one of the websites they have a installation guide. And they say i need to code the adapter or the system so it works together. And they say i can use OBDeleven. So i eas wondering if anyone else have used this produkt or anyone know how i code it and which code i need. I have not recieved the prodult yet so i dont know if it comes with anything related to this
|
|
|
Post by crazyrobot321 on Nov 13, 2021 22:55:35 GMT
Oooo, My friend purchased this and I had to code it by doing this:
Enter Radio (56) Enter Long coding
Byte 11 --> Enable Bit 3 (Mobile Device Interface settings)
And I think you need to restart the radio after coding is accepted. If i recall correctly you restart it by holding the power button
|
|
|
Post by hommebrus on Nov 18, 2021 5:54:14 GMT
Was this on the obdeleven and if it was how do you do that? Or was it in the green menu?
|
|
|
Post by crazyrobot321 on Nov 18, 2021 10:48:13 GMT
This was on obdeleven
|
|
|
Post by hommebrus on Nov 18, 2021 14:55:55 GMT
Did it just appear as an app?
|
|
|
Post by crazyrobot321 on Nov 18, 2021 17:04:48 GMT
I coded via the obdeleven device, I do not know if coding is different for the Symphony radio.
This coding applies to the Concert Radio:
Enter Radio (56)
Enter Long coding Navigate to Byte 11
Enable Bit 3 (Mobile Device Interface settings)
|
|