Post by nikos1 on Nov 2, 2021 15:52:54 GMT
Hello,
I have a static error of wrong coding on 44 unit. I have take a look on history - backup and long coding is the same(i have delete adaptation changes by mistake). I want to compare adaptation values with someone who has the same car with me.
My car is a Kamiq MY2021 1.6 TDI DSG and my 44 info is attached bellow.
Please take a look bellow if you same 44 unit and tell me if you spot any difference in adaptation values:
ADAPTATIONS
1)Download without rest bus: not active
2)XCP calibration protocol: active
3)Activating and deactivating all development messages: not active
4)Activation of pwr steering asst without engine running: not active
5)Software end stop: active
6)Straight line running: Active, with learned value
7)Support power: 100%
8)Driving profile swithover: Incremental, controlled over time
9)Characterisitc curve of steering Assistance: Driving profile selection button
10)Plausibility check: Active
11)Pull compensation: Active, with learned value
12)Steering angle, calculated: not active
13)Engine variant: Large
Thank you in advance for your help!
I have a static error of wrong coding on 44 unit. I have take a look on history - backup and long coding is the same(i have delete adaptation changes by mistake). I want to compare adaptation values with someone who has the same car with me.
My car is a Kamiq MY2021 1.6 TDI DSG and my 44 info is attached bellow.
Please take a look bellow if you same 44 unit and tell me if you spot any difference in adaptation values:
ADAPTATIONS
1)Download without rest bus: not active
2)XCP calibration protocol: active
3)Activating and deactivating all development messages: not active
4)Activation of pwr steering asst without engine running: not active
5)Software end stop: active
6)Straight line running: Active, with learned value
7)Support power: 100%
8)Driving profile swithover: Incremental, controlled over time
9)Characterisitc curve of steering Assistance: Driving profile selection button
10)Plausibility check: Active
11)Pull compensation: Active, with learned value
12)Steering angle, calculated: not active
13)Engine variant: Large
Thank you in advance for your help!
