|
Post by jor3421 on Nov 1, 2021 22:55:34 GMT
Hi All,
Have been referred to OBDeleven to resolve an issue with a new head unit I purchased, model below.
Car: 2015 Golf TDI 1.6 Unit: 5GD035280B
When I installed it, I received an error on the display when the car was looking for a reverse camera (which I do not have). I was advised to purchase the OBDeleven next gen with the pro subscription and use it to deactivate "byte_19_rear_view_low".
This worked a charm and I no longer receive the error, however the stock unit used to display the car animation with the parking sensors displayed as I got closer to an object (while parking or reversing).
Is there a way to use the device & Pro subscription to enable this feature again? Any guidance or help would be greatly appreciated.
Thanks JoR
|
|
|
Post by vwjap on Nov 3, 2021 14:39:49 GMT
I think it’s in long coding under something like park pilot
|
|
|
Post by jor3421 on Nov 5, 2021 18:06:43 GMT
Thanks for the response.
I have tried to enable the feature via long coding and through apps using credits but it doesn’t change anything on the settings unit.
Worked fine on the stock unit before I retro fitted the carplay unit.
|
|
|
Post by vwjap on Nov 7, 2021 8:43:01 GMT
Ok look at the coding see if it’s there First
5F Infotainment - Adaptation - see if all are active
Vehicle function list BAP-parking_assist_0x0A
Vehicle menu operation-menu_display_pdc
Vehicle menu operation-menu_display_pdc_over_threshold_high
|
|
|
Post by jor3421 on Nov 9, 2021 9:54:11 GMT
Found all these from your instructions, they were all disabled but I’ve enabled them.
It hasn’t enabled the visual graphic but it has removed the “No Rear Camera Found” error.
|
|