|
|
Enyaq iV
Oct 31, 2021 14:56:20 GMT
via mobile
Post by zarjaz on Oct 31, 2021 14:56:20 GMT
So much emptyness...! What can we do with our new Enyaq?!
|
|
vbrolin
Closed beta tester
Posts: 5
|
Post by vbrolin on Nov 3, 2021 21:27:47 GMT
I've have so far been able to:
Remove auto-lock and add it to the menus on the screen.
Configure the rear lights to be on during the day on the Auto setting.
Set comfort indicators from 3 to 5
Done some test coding with Easy Entry but havn't gotten that to work yet.
Have searched for a way of getting the high beam assist to stay on permanently, but haven't found it yet.
EDIT:
Got Easy Entry working.
Also found was to both turn off the Welcome/privacy screen, as well as the exit screen.
Found the Highway lights config, set to 140 kph. Tried lowering it but they wouldn't turn on because it was raining, will have to test another day.
Also found a parameter for using Appconnect over wifi. Could be nice for someone who lives with bad cell coverage if it work, had no wifi coverage so could not try it out.
|
|
|
|
Post by bslefevre on Nov 11, 2021 12:30:04 GMT
Hi!
I’m a closed beta tester for the Enyaq
But none of the apps are compatible, am I doing something wrong?
I’ve installed the beta via TestFlight
|
|
john66
Closed beta tester
Posts: 5
|
Enyaq iV
Nov 11, 2021 15:59:45 GMT
via mobile
Post by john66 on Nov 11, 2021 15:59:45 GMT
I've have so far been able to: Remove auto-lock and add it to the menus on the screen. Configure the rear lights to be on during the day on the Auto setting. Set comfort indicators from 3 to 5 Done some test coding with Easy Entry but havn't gotten that to work yet. Have searched for a way of getting the high beam assist to stay on permanently, but haven't found it yet. EDIT: Got Easy Entry working. Also found was to both turn off the Welcome/privacy screen, as well as the exit screen. Found the Highway lights config, set to 140 kph. Tried lowering it but they wouldn't turn on because it was raining, will have to test another day. Also found a parameter for using Appconnect over wifi. Could be nice for someone who lives with bad cell coverage if it work, had no wifi coverage so could not try it out. Just changed some settings on my daughters Fabia, dongle and android app are working. When i try to change to have rear lights on with drl on my Enyaq 60 the message is: please turn ignition on which is on...am i missing something? |
|
|
|
Post by speksu on Nov 11, 2021 18:51:36 GMT
I just coded Travel Assist to my Enyaq. When I ordered car I only had Assisted Drive Basic package which did not include Travel Assist. I did coding using long coding in A5 Driver assistance module.
This is the log:
Control unit: A5 Driver Assistance
Old value:
02 08 30 2E 1F 91 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
New value:
02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
I tested and Travel Assist worked fine. I already had Travel assist button in my steering wheel and before it did not do anything but now it does.
HC_point_of_intervention
Old: late
New: early_setting_over_menu
Emergency_assist_variante
Old: Not_coded
New: Ea_variante_2
HC_variante
Old: Hc_variante_0
New: Hc_variante_2
|
|
|
|
Enyaq iV
Nov 11, 2021 18:59:06 GMT
via mobile
Post by bslefevre on Nov 11, 2021 18:59:06 GMT
To being able to use the click Apps for the Enyaq is there something that needs to be activated from the dealer?
It says that all the click Apps are incompatible, are you all experiencing this?
|
|
|
|
Enyaq iV
Nov 11, 2021 19:06:15 GMT
via mobile
Post by bslefevre on Nov 11, 2021 19:06:15 GMT
I've have so far been able to: Remove auto-lock and add it to the menus on the screen. Configure the rear lights to be on during the day on the Auto setting. Set comfort indicators from 3 to 5 Done some test coding with Easy Entry but havn't gotten that to work yet. Have searched for a way of getting the high beam assist to stay on permanently, but haven't found it yet. EDIT: Got Easy Entry working. Also found was to both turn off the Welcome/privacy screen, as well as the exit screen. Found the Highway lights config, set to 140 kph. Tried lowering it but they wouldn't turn on because it was raining, will have to test another day. Also found a parameter for using Appconnect over wifi. Could be nice for someone who lives with bad cell coverage if it work, had no wifi coverage so could not try it out. How did you do this? Did you go through the longcoding? |
|
|
|
Enyaq iV
Nov 11, 2021 19:14:32 GMT
via mobile
Post by Gaz Za on Nov 11, 2021 19:14:32 GMT
To being able to use the click Apps for the Enyaq is there something that needs to be activated from the dealer? It says that all the click Apps are incompatible, are you all experiencing this? Why would you have the button, if you did not already have Travel Assist? I only got Assisted Drive Basic. Would this coding do anything for me? |
|
|
|
Post by speksu on Nov 12, 2021 9:52:10 GMT
Did you meant to reply to my message?
I did have Travel assist button in my steering wheel but it was not working. After the long coding I did then Travel assist is working. I know others who received car with that button and actually many who received their LE (launch edition) model had also Travel assist working even though they ordered only Assisted drive basic package.
Do you have travel assist button in your steering wheel?
|
|
|
|
Post by albertotf on Nov 12, 2021 10:34:28 GMT
Good morning everyone,
I have read that it is already possible to unlock SFD from the MEB platform, my question is whether unlocking it may affect the vehicle warranty in any way, I do not know if they could clarify it for me.
Thank you!
|
|
|
|
Post by havearead on Nov 12, 2021 11:47:44 GMT
have a read of the OBD11 Terms and Conditions
"The use of functions of the Application may void the warranty applicable to the vehicle, its separate parts and systems, and accordingly you should contact vehicle manufacturer’s representatives for validity of warranty terms. "
SFD is on MQBEvo and MEB Platform and to unlock it you have to talk to VW and provide them with your personal details including IP Address and VIN Number.
Will Skoda do anything with the info we dont know but they will have the information.
|
|
|
|
Enyaq iV
Nov 12, 2021 14:03:56 GMT
via mobile
Post by Gaz Za on Nov 12, 2021 14:03:56 GMT
Good morning everyone, I have read that it is already possible to unlock SFD from the MEB platform, my question is whether unlocking it may affect the vehicle warranty in any way, I do not know if they could clarify it for me. Thank you! I have a button with a car surrounded by 4 arcs (top, left, right, left). Is this the Travel Assist button? |
|
|
|
Enyaq iV
Nov 12, 2021 14:05:03 GMT
via mobile
Post by Gaz Za on Nov 12, 2021 14:05:03 GMT
Why would you have the button, if you did not already have Travel Assist? I only got Assisted Drive Basic. Would this coding do anything for me? Did you meant to reply to my message? I did have Travel assist button in my steering wheel but it was not working. After the long coding I did then Travel assist is working. I know others who received car with that button and actually many who received their LE (launch edition) model had also Travel assist working even though they ordered only Assisted drive basic package. Do you have travel assist button in your steering wheel? I have a button with a car surrounded by 4 arcs (top, left, right, left). Is this the Travel Assist button? |
|
|
|
Post by speksu on Nov 15, 2021 6:43:39 GMT
|
|
vbrolin
Closed beta tester
Posts: 5
|
Post by vbrolin on Nov 15, 2021 18:58:45 GMT
Hi,
Sorry, didn't noticed you replied here.
Disable autolock and add it to the display menus:
Control unit: 19 Gateway
Adaption:
ZV_Autolock:
automatisches Verriegeln bei Geschwindigkeit: from active to not_active
automatisches Verriegeln bei Geschwindigkeit: from active to not_active
ZV_autolock_autounlock_hmi: from not_active to adjustable
Rear DRLs:
Control unit: 09 Central Electrics
Adaptation:
Leuchte 23 SL HL C31: Lichtfunction B32: from nicht aktive to aktive100prozent, Lichtfunction C32: from nicht aktive to LED-Heckleuchte Versorgung
Leuchte 24 SL HL A61: Lichtfunction B24 from nicht aktive to aktive100prozent, Lichtfunction C24: from nicht aktive to LED-Heckleuchte Versorgung
Easy entry Driver side:
Control unit: 36 Driver Seat
Long Coding:
Easy_Entry_front, From not_active to active
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
Vehicle function list BAP, driver_seat_0x10, from not_activated to activated
Vehicle menu operation, menu_display_seat_configuration, from not_activated to activated, menu_display_seat_configuration_over_threshold_high, from not_activated to activated
(Passenger side should be the same config for passenger side controller, plus adding it in the Vehicle function list BAP)
Remove Welcome/Privacy Screen:
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
privacy_mode, timeout, from 5 s to not_active
Remove exit screen:
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
exit_screen_configuration, exit_screen, from activated to not_activated
App Connect over wifi
Not been able to verify yet, but seems to allow remote control of the car over wifi if mobile connection isn't available.
Control unit: 8125 Application server 3 system 1 infotainment
Adaptation:
function_configuration_connectivity, app_connect_over_wifi, from no to yes
Comfort indicators, number of blinks
Control unit: 19 Gateway
Adaptation:
Light_control, Komfortblinken Blinkzyklen, number value (says up to 3 but 5 was accepted)
|
|
hdv
New Member
Posts: 4
|
Post by hdv on Nov 23, 2021 19:31:01 GMT
Hi guys,
I’m trying to enable skandinavian drl and some other adjustments with the new dongle and an iPhone 13 but all I get is: problem with sfd.
Trying through the apps and long coding but nothing works..
I’ve set my account right with 2fa etc. Am I doing something wrong?
|
|
|
|
Post by backes89 on Dec 1, 2021 8:11:55 GMT
App Connect over wifi Not been able to verify yet, but seems to allow remote control of the car over wifi if mobile connection isn't available. Control unit: 8125 Application server 3 system 1 infotainment Adaptation: function_configuration_connectivity, app_connect_over_wifi, from no to yes Going to try this out since I don't have good mobile reception at home. |
|
|
|
Enyaq iV
Dec 9, 2021 17:32:17 GMT
via mobile
hdv likes this
Post by bslefevre on Dec 9, 2021 17:32:17 GMT
Hi guys, I’m trying to enable skandinavian drl and some other adjustments with the new dongle and an iPhone 13 but all I get is: problem with sfd. Trying through the apps and long coding but nothing works.. I’ve set my account right with 2fa etc. Am I doing something wrong? I’ve also got problems with my iPhone I’ve bought an Android tablet and it works with Android without any problems! |
|
|
|
Post by terho5 on Dec 16, 2021 10:23:28 GMT
Hello
Why i dont see any gauges?
|
|
hdv
New Member
Posts: 4
|
Post by hdv on Dec 17, 2021 13:13:13 GMT
Hi guys, I’m trying to enable skandinavian drl and some other adjustments with the new dongle and an iPhone 13 but all I get is: problem with sfd. Trying through the apps and long coding but nothing works.. I’ve set my account right with 2fa etc. Am I doing something wrong? I’ve also got problems with my iPhone I’ve bought an Android tablet and it works with Android without any problems! Thanks for the tip, found an old Android phone and OBD11 works finally. One thing i can't figure out is mirror dip on reversing. Tried it with the apps, but the mirror tilts up instead of down when reversing. Tried with long coding but the same problem. Tried to manually set the desired mirror setting on reversing but the mirror keeps going up.. Thought maybe the wiring is reversed inside the mirror, but when i set the mirror with the knob on the drivers side, the mirror works as it is supposed. I'm a little lost now..  |
|
|
|
Enyaq iV
Dec 17, 2021 21:00:24 GMT
via mobile
Post by zarjaz on Dec 17, 2021 21:00:24 GMT
I just coded Travel Assist to my Enyaq. When I ordered car I only had Assisted Drive Basic package which did not include Travel Assist. I did coding using long coding in A5 Driver assistance module. This is the log: Control unit: A5 Driver Assistance Old value: 02 08 30 2E 1F 91 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 New value: 02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I tested and Travel Assist worked fine. I already had Travel assist button in my steering wheel and before it did not do anything but now it does. HC_point_of_intervention Old: late New: early_setting_over_menu Emergency_assist_variante Old: Not_coded New: Ea_variante_2 HC_variante Old: Hc_variante_0 New: Hc_variante_2 I only have Assisted Drive Basic, and it would be great if this worked. Thing is, I do not have the Travel Assist bbutton on my steering wheel. What do you think? |
|
|
|
Enyaq iV
Jan 1, 2022 21:25:48 GMT
via mobile
Post by symbiont on Jan 1, 2022 21:25:48 GMT
I just coded Travel Assist to my Enyaq. When I ordered car I only had Assisted Drive Basic package which did not include Travel Assist. I did coding using long coding in A5 Driver assistance module. This is the log: Control unit: A5 Driver Assistance Old value: 02 08 30 2E 1F 91 08 E0 06 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 New value: 02 08 30 2E 1F 91 10 E4 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 I tested and Travel Assist worked fine. I already had Travel assist button in my steering wheel and before it did not do anything but now it does. HC_point_of_intervention Old: late New: early_setting_over_menu Emergency_assist_variante Old: Not_coded New: Ea_variante_2 HC_variante Old: Hc_variante_0 New: Hc_variante_2 So today did this coding on someone's enyaq with a 2 spoke steering wheel instead of a 3 one. Above settings worked perfectly, except after doing the long code it gives an error on traffic sign recognition.. so TA works, just not the recognition anymore. It is not working anymore in menu either. I myself have a 3 spoke version with the assistant plus.. so my setting is a bit different: 02 08 30 2E 1F 91 00 F8 16 24 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 HC_point_of_intervention: early Emergency_assist_variante: Ea_variante_4 HC_variante:Hc_variante_2 So my question is..is there a list of byte codes as in what they mean? And why mine is different from yours for TA? |
|
|
|
Post by jeroenk on Jan 7, 2022 6:42:34 GMT
Rear DRLs: Control unit: 09 Central Electrics Adaptation: Leuchte 23 SL HL C31: Lichtfunction B32: from nicht aktive to aktive100prozent, Lichtfunction C32: from nicht aktive to LED-Heckleuchte Versorgung Leuchte 24 SL HL A61: Lichtfunction B24 from nicht aktive to aktive100prozent, Lichtfunction C24: from nicht aktive to LED-Heckleuchte Versorgung I can confirm that this adaption does not work on the Matrix rear lights. When you change these settings the rear lights do not turn on with the front DRL. I noticed not only that it does not work but if the car is locked and you try to open te door, key not near the car, the rear light turn on. Really strange behavior. The one click app also don’t work. It just states that it is incompatible. Is there some other coding that i can try/test to use the rear lights with DRL? |
|
|
|
Enyaq iV
Jan 10, 2022 23:43:44 GMT
via mobile
Post by evstief on Jan 10, 2022 23:43:44 GMT
Hi,
I have the same problem with rear DRL.
The settings don't work for me
|
|
vbrolin
Closed beta tester
Posts: 5
|
Enyaq iV
Jan 11, 2022 22:01:09 GMT
via mobile
Post by vbrolin on Jan 11, 2022 22:01:09 GMT
Rear DRLs: Control unit: 09 Central Electrics Adaptation: Leuchte 23 SL HL C31: Lichtfunction B32: from nicht aktive to aktive100prozent, Lichtfunction C32: from nicht aktive to LED-Heckleuchte Versorgung Leuchte 24 SL HL A61: Lichtfunction B24 from nicht aktive to aktive100prozent, Lichtfunction C24: from nicht aktive to LED-Heckleuchte Versorgung I can confirm that this adaption does not work on the Matrix rear lights. When you change these settings the rear lights do not turn on with the front DRL. I noticed not only that it does not work but if the car is locked and you try to open te door, key not near the car, the rear light turn on. Really strange behavior. The one click app also don’t work. It just states that it is incompatible. Is there some other coding that i can try/test to use the rear lights with DRL? Works for me, but mine was sold in Sweden and might come with other programming as standard. For me it works as intended. Got Matrix lights. |
|
john66
Closed beta tester
Posts: 5
|
Post by john66 on Jan 22, 2022 18:24:39 GMT
Hi all. Today I've changed some settings. Works great. When I change comfort indicators to 4 or 5 it's accepted and stored (via apps). Only thing is, it keeps blinking 3 times. When I look in the module and open the setting it shows possible setting 0-3. Who has experienced this also? If you have changed it in 4 or 5 it really blinks 4 or 5?  |
|
|
|
Post by evstief on Jan 23, 2022 7:25:49 GMT
I have the same problem
I'll trie to reset tomorrow and see if I can get 4x blink working
|
|
|
|
Post by camille2 on Jan 28, 2022 19:50:19 GMT
Any luck after reset?
|
|
jok3r
New Member
Posts: 2
|
Post by jok3r on Feb 4, 2022 10:03:42 GMT
For those who have enabled Travel Assist. Are you able to use the full features of this upgrade? If so then it must mean that you have the appropriate hardware like sensors to make it all work...
|
|
|
|
Post by svenbllll on Feb 14, 2022 13:26:48 GMT
I tried yesterday, but got an error (number 13). Got the wheel with the button. Anybody a clue why it didn't work? Or do you indeed need any hardware?
|
|
