dynamic tail light retro fit question

That's not entirely true
You can retrofit without going to audi or without going to any place to install or code


What I did was simple.. I got the cables from kufatec and came with a dongle like obdeleven but is automatic.
The cables are just like the audi ones the originals but without the codes because the dongle has the codes inside the operating system

When you plug the cables and makes the auto code processing you have all set but without dynamic

Now.. To get dynamic you have 2 ways.. One is to know if your Confort central 46 is compatible with dinamic.. It has an specific ping for it if it's the case you put it 4 cables in that pin and will work the dynamic.. If you don't have this compatible 46 comfort central you have 2 choices

1...you go to audi and replace the comfort 46 and pay the change plus coding of that central

2...option 2.. You stay home and you go for a 12 volts point in your car for example a wire from the cigarette light and if you connect the 4 cables to this cables you will get the dinamic

With this last thing you have one small thing...your car must be started to get power there so you will get dynamic only with started car so when you open it will make no dynamic then yes

If you care about this detail then you need to go to the Fuze on the back left and search wich free fuz has 12 volts with no ignition and the ping there


As you see you can do all this without a single step of your shoes by any audi