|
Post by carbonchaos on Oct 27, 2021 9:15:30 GMT
Hi all, here is a simple tweek to allow ALL the interior lights ( heater controls,window switches,infotainment surround,etc)to fade in/out when switched on/off. from factory they operate by instantly switching on/off this will make them dim on /off.
once connected select the following 09 central electrics Adaptations Security code 31347 interior lighting KL58 Einschalten mit rampe - default is non active,set this to active confirm this via the green tick bottom right then exit
A point I will make is that although this new coding was accepted I had to let all the control units power down completely before I noticed any change.
|
|
|
Post by maniek on Feb 23, 2022 19:58:08 GMT
thx for info
|
|