Post by happilytree on Oct 14, 2021 5:57:06 GMT
Hey guys,
My car is a Canadian spec 2019 VW GTI Rabbit Edition. I recently bought an OBDELEVEN PRO NextGen to use with iOS.
Then I turned "Fog lights with Auto lights" from off to on. I think my error was enabling both of these adaptations at the same time.
Now my issue is that with the light switch pushed in (fogs off) on Auto, the right fog light is off when it should stay on, and the left fog light stays on through all 3 light positions (which it should not. It should only be on when it's Auto). The left fog has also become part of the coming/leaving home lights. It's pretty much always on except if the dial is turned to "0" (everything off).
I thought the issue might be with the "DRL with Fog Lights" enabled at the same time, so I turned it off. The issue was not fixed. Now I cannot disable the adaptation "Fog Lights with Auto Lights"; current value is shown as "Unknown", and trying to change it results in "ERROR Try Again".
My car is a Canadian spec 2019 VW GTI Rabbit Edition. I recently bought an OBDELEVEN PRO NextGen to use with iOS.
Initially, I enabled the adaptation "Fog lights with Auto lights" from off to on, then on to off with no issue.
Then I turned on "DRL with Fog Lights".Then I turned "Fog lights with Auto lights" from off to on. I think my error was enabling both of these adaptations at the same time.
Now my issue is that with the light switch pushed in (fogs off) on Auto, the right fog light is off when it should stay on, and the left fog light stays on through all 3 light positions (which it should not. It should only be on when it's Auto). The left fog has also become part of the coming/leaving home lights. It's pretty much always on except if the dial is turned to "0" (everything off).
I thought the issue might be with the "DRL with Fog Lights" enabled at the same time, so I turned it off. The issue was not fixed. Now I cannot disable the adaptation "Fog Lights with Auto Lights"; current value is shown as "Unknown", and trying to change it results in "ERROR Try Again".
At this point I would just like to know how to turn "Fog Lights with Auto Lights" to "Original" or "OFF" so I can start over. I would appreciate any help with this.
Next time I'll be sure to turn off an adaptation before enabling another one affecting the same thing..
Also side note, I do have PRO, but when I try going into the long coding for the lights, I get something like "Error: Long coding could not be read." Is that because I'm using iOS?