biro
New Member
Posts: 5
|
Post by biro on Oct 6, 2021 14:49:23 GMT
I’m in all kind of help, I’m getting frustrated. I get fault code P1553 I’ve replaced the following: MAP sensor EGR valve also configured it with the app. Throttle valve and did an alignment with the app.
The idle is walking between 1000rpm - 400~ and almost dies If I unplug the EGR the engine lamp turns on but the car runs OK just a little slow on the gas response.
Is it possible that the new EGR valve is also bad?
Lupo 2001, 1.4 16v gasoline
Kind regards,
|
|
biro
New Member
Posts: 5
|
Post by biro on Oct 13, 2021 20:06:07 GMT
Bump
|
|