|
|
Post by carbonchaos on Oct 5, 2021 16:59:04 GMT
Hi all ,
sorry if this has been covered before but I searched the forum but couldn’t find the answer.
so I would like the rear position lamps ( outer and inner on hatch) to be on with DRL’s with the light switch in the ‘o’ position,I have done this on my other cars but it’s different on golf as you have two sets of lights each side.
I would like to know which leuchte set to turn on to tagfahrlicht and which light function to use and dimming suggestions
I know I could just use Scandinavian DRL’s app but I don’t like all the interior switches lit up all the time.
Vehicle in question is a 2016 golf GTI with OEM led rear lamps as standard fitment uk spec
regards
|
|
valk
Full Member
Posts: 112
|
Post by valk on Oct 5, 2021 18:17:10 GMT
I can give you my settings.
I have coded my tail lights as drl, without the scandinavian light function. Mine are EU settings, so I don’t thunk there are any differences
Greetings,
Valk
|
|
|
|
Post by carbonchaos on Oct 5, 2021 20:09:27 GMT
Ok thanks do you also have LED rear lamps, can you post here
|
|
valk
Full Member
Posts: 112
|
Post by valk on Oct 5, 2021 20:20:00 GMT
Yes I do have LED tails.
I will post them as soon as I find the time (somewhere tomorrow)
Also: I coded all the lights to function as brakelight (including hatch)
That will be included in de log.
|
|
valk
Full Member
Posts: 112
|
Post by valk on Oct 6, 2021 16:49:01 GMT
|
|
|
|
Post by carbonchaos on Oct 6, 2021 17:26:54 GMT
Thanks for taking the time to post this it’s very much appreciated,I will try and look into this at the weekend weather permitting 🤔 I see you answered my other post ref hatch brake lights which I’m also going to do this is what I’m hoping to accomplish with the rears as DRL’s currently this is my position lamps with the switch in auto or manual.  |
|
valk
Full Member
Posts: 112
|
Post by valk on Oct 6, 2021 18:24:51 GMT
You’re welcome!
It is not easy to figure out by yourself/on your own.
That is why there’s a forum 😃
With my coding, the tail lights are always on.
In the 0 position, Auto or manual.
I increased the diimmwert, so that the tail lights are a bit brighter.
It is completely up to you if you want to copy that also.
(English is not my first language, my apologies)
|
|
|
|
Post by carbonchaos on Oct 6, 2021 20:11:52 GMT
Valk firstly let me tell you your written English is good very 👍
Can you tell me why there appears to be 5 leuchte in your post ? And which one is which lamp ?
ie Leuchte 27nsl rc6 is both hatch lamps - correct ?
Leuchte ?.? is the outer left lamp
Leuchte ?.? is the outer right lamp
many thanks
|
|
valk
Full Member
Posts: 112
|
Post by valk on Oct 6, 2021 20:34:19 GMT
20 & 21 are the ‘c’ lights on the outer side.
23 & 24 are the 2 led dots that behave like switchbacks (brake/tail & turnsignal)
27 are both light in the hatch
|
|
valk
Full Member
Posts: 112
|
Post by valk on Nov 3, 2021 18:29:31 GMT
Did it work?
|
|
|
|
Post by carbonchaos on Feb 26, 2023 18:01:59 GMT
Hey really sorry for not getting back to you after your help, but life stuff happens and I’ve not been on here for a while.
Yes it works perfectly,I used your screen shots for the lamps in question and comparing them to mine was able to work out and write down the differences ,once I had this information the rest was straight forward coding.
I have left my brightness OEM where yours was adjusted up to 21 from 10 which is factory.
|
|
