|
|
Post by MGRobbie on Jan 25, 2016 19:03:37 GMT
I have bought the PRO package and try to change settings for "comming home" and "leaving home". I can easily enter the menu and settings select the new required seconds. When I confirm it I get the display that I cannot change these settings.
What goes wrong???
|
|
|
|
Post by OBDeleven on Jan 25, 2016 21:09:33 GMT
Please try to change settings again then press three dots in top right corner and select report error.
|
|
|
|
Post by MGRobbie on Feb 1, 2016 2:21:45 GMT
I have made error report like described. I will await your feedabck.
|
|
|
|
Post by MGRobbie on Feb 1, 2016 19:07:06 GMT
I had dongle fully connected. Thnx to other thread. Changed settings again for coming and leaving home. When trying to save the input below came a rectangualr in red Changes not accepted. I pressed thre richt top dots and made report.
|
|
|
|
Post by OBDeleven on Feb 2, 2016 8:19:43 GMT
Hi, you need to enter security access 31347 before performing changes.
|
|
|
|
Post by MGRobbie on Feb 2, 2016 17:20:36 GMT
Good to know, but where, which menu?? Did I miss this in proper reading somewhere?
|
|
|
|
Post by OBDeleven on Feb 3, 2016 12:56:40 GMT
Go to Central electrics > Security access > enter 31347 > Press OK > then change coding or adaptations
|
|
|
|
Post by MGRobbie on Feb 3, 2016 17:31:47 GMT
This works perfect thank you. Now next thing appears. I found out I need Security acces code for each item I want to change. Please provide a list for this codes.
|
|
