ssb
New Member
Posts: 1
|
Post by ssb on Sept 29, 2021 0:41:30 GMT
I had a small car back into me and hit my front end around where the ACC left distance sensor is located. A few hours later I started getting a code that the sensor is "misaligned". I followed a video online that shows clearly how to use the OBDEleven to see the data and recalibrate - so all good. See image for data.
After adjusting, I entered the security code (20103) and it is accepted, but when I go to basic settings to reset the calibration that option is not in the list. Has anyone successfully recalibrated their left sensor and gotten the adjustments to register? Full Scan: OBDeleven_Log.txt (7.58 KB)
|
|
magas
New Member
Posts: 2
|
Post by magas on Sept 22, 2022 13:15:42 GMT
I have a similar issue. Can't reset anything using OBDeleven PRO.
|
|
maz
New Member
Posts: 2
|
Post by maz on May 24, 2023 11:34:06 GMT
Hi! To reset, you’ll first have to switch to “End of Assembly Line”, then follow the A6 video you saw on your tube by Mr-Fix. He didn’t show us that particular step (probably didn’t need it in his case or was already in another service mode “developer”). Good luck.
|
|