neo
New Member
Posts: 2
|
Post by neo on Sept 11, 2021 10:09:36 GMT
I installed LED bulbs to my headlight unit and it's started giving me error for rear lights and also some front but the lights are working. I don't realy want to start using resistors so lets leave that as a final resort please.
Can i remove the errors with OBDeleven or do i need to buy VCDS ?
My LED i bought are from amazon here are the links.
Re-checked my lights today and they still work fine. It's set to auto and my DRL LEDS flicker and flash 3 times but then stay solid. I know this is the system sending signals but how to remove all this error.
I have LED in my FORD CONNECT 2007 work van with no issues xD
|
|
DB62
New Member
Posts: 2
|
Post by DB62 on Oct 18, 2021 11:00:25 GMT
I’m having the same issue with my 2011 GTI. My LED lights from Amazon cause the fault lights but everything works except my side markers from DEAUTOkey. I’ve tried resetting the canbus and that didn’t work they stay on for 15 seconds and turn off when the engine is running but they stay on with just the key in the on position. I also tried resistors and that still hasn’t fixed the faults or made them stay on. Im also trying to find some suggestions on here before I take it the tuners and see what they can do.
|
|