Post by dk11706 on Feb 14, 2017 22:18:44 GMT
Hi,
I have a Passat B8 MY 2017, I found these Start/Stop settings for VCDS and would like some help to translate the instructions into OBD11 language.
Disabling Start & Stop
VCDS Procedure
Select 09 Central electrics.
Security access 16, enter 20113
Adaptation 10
Channel 34
The original total value in channel 34 appears to be just 4 which as we know defaults SS to ON at each start.
Altering the total value by these amounts will make these changes....
Subtract 4 = default is OFF at each start.
Add 32 = default is last used setting.
Add 64 = reverses amber indicator.
Note with all choices the On/Off switch still functions.
I would just like to reverse the S/S, so I can enable it when I feel like it.
Thank you
I have a Passat B8 MY 2017, I found these Start/Stop settings for VCDS and would like some help to translate the instructions into OBD11 language.
Disabling Start & Stop
VCDS Procedure
Select 09 Central electrics.
Security access 16, enter 20113
Adaptation 10
Channel 34
The original total value in channel 34 appears to be just 4 which as we know defaults SS to ON at each start.
Altering the total value by these amounts will make these changes....
Subtract 4 = default is OFF at each start.
Add 32 = default is last used setting.
Add 64 = reverses amber indicator.
Note with all choices the On/Off switch still functions.
I would just like to reverse the S/S, so I can enable it when I feel like it.
Thank you
