gpav
New Member
Posts: 26
|
Post by gpav on Sept 9, 2021 8:06:03 GMT
Hello,
is it possible to activate Optical display for original/factory installed rear parking sensors?
Car model Audi Q3 F3 2019-
It is in unit 76 then extended coding, then optical indicator and choose OPS
Moreover (i dont know if this is the right position), many one click apps in Q3 F3 do not work, they either say not supported or spent the coins and do nothing. Please check
Thanks in advance!
|
|
|
|
Post by One-Click apps developer on Sept 10, 2021 13:32:04 GMT
Hello,
Thank you for the request. The app "Optical Parking System" has been added.
Maybe you can specify which app is not working?
Best regards
|
|
gpav
New Member
Posts: 26
|
Post by gpav on Sept 13, 2021 12:37:13 GMT
Hello, thank you i will test it this afternoon!
The non-working apps that i have found till now are (most of the available unfortunately):
1) High beam assist
2) navigation/compass (i expected compass to be activated as no official navi is present in the car)
3) acceleration display
4) (whatever) light with open trunk
5) throttle pedal response
6) refuel quantity
7) Video in motion
8) oil temperature
the car was compatible with all these apps requirements (with a ? in the navi/compass) so it should work
|
|
gpav
New Member
Posts: 26
|
Post by gpav on Sept 13, 2021 17:57:30 GMT
Feedback
The coding passes and success is given however it does not work. In fact what affected only is the time that the rear view camera remains after removing reverse gear (it was 5-6 before by factory and now is instant which is not my best). I don’t know why this happens, this should work as per another users proposals based on the coding that I provided above.
I can now no longer enter unit 76 long coding (it gives some fault and says try again later). Any ideas?
|
|
gpav
New Member
Posts: 26
|
Post by gpav on Sept 15, 2021 7:53:59 GMT
whenever you can please check the feedback, unfortunatelly for some reason it is not working properly and it did not drive to the desired update
|
|
|
|
Post by One-Click apps developer on Sept 16, 2021 5:28:44 GMT
Hello,
can you please provide the VIN of the Audi Q3 via private message?
Regards.
|
|
gpav
New Member
Posts: 26
|
Post by gpav on Sept 16, 2021 11:03:32 GMT
Yes, i send it right now
|
|
tg65
New Member
Posts: 5
|
Post by tg65 on Jul 24, 2023 16:01:38 GMT
Hi
just tried to install the optical display with the app on my Q3 SB 2023 (only with back sensors) and keep having an error say check ignition is turned on and try again. I have switch car on and off and also restarted the app but get the same error. I even opened the bonnet. The other apps I have used have worked okay. Is there anyone that can help.
|
|
