ACC fault after enabling Hill Hold Control

Hello,
yesterday I enabled Hill Hold Control by enabling Bit 0 of Byte 22 of ECU03 (Brakes) and the hill-start assistance works perfectly.
There is only one problem: after enabling the bit and saving the configuration, I got the amber TPMS icon on the cluster, which went away after I turned off the ignition and removed OBDeleven from the OBDII port.

Now, after scanning, I have 3 faults and they're all the same:

    ^Databus error value received
        Fault code: U112300 (1070)
        Status: intermittent
        Malfunction frequency counter: 1
        Unlearning counter: 26
        Mileage: 5109 km
        Date: 2017-02-11 14:50:42
        Priority: 6

    ^Databus error value received
        Fault code: U112300 (1069)
        Status: intermittent
        Malfunction frequency counter: 1
        Unlearning counter: 26
        Mileage: 5109 km
        Date: 2017-02-11 14:50:41
        Priority: 6

    ^Databus error value received
        Fault code: U112300 (1082)
        Status: intermittent
        Malfunction frequency counter: 1
        Unlearning counter: 26
        Mileage: 5109 km
        Date: 2017-02-11 14:50:41
        Priority: 6

ACC Long coding: 00 00 00 00 FE 03 39
Does somebody know what they mean and how can I solve this? These are the only errors I have.

Cheers!