Post by francsrr on Aug 29, 2021 4:43:00 GMT
Good morning all, I’m a new user from Italy and this is my first post here.
I retrofitted a OEM rear camera (kit from kufatec) on my 2019 Variant. It was working very well after the coding through their OBD dedicated dongle and I just had a calibration error from OBDEleven scans.
After few days when I was driving I received a “park pilot not available” message in my discover media mk2. After that message park pilot and rear camera are not working anymore.
Can any of you help on checks to be performed prior to disassembly again all my car to check the cables?
Is this related to DC current or CANBUS?
Can’t understand how it worked for days prior to failing…once cable is routed you never touch it again!
Here the errors I receive:
19 Gateway
System description: GW MQB High
Software number: 3Q0907530AA
Software version: 5366
Hardware number: 3Q0907530C
Hardware version: 521
Serial number: 22121810802788
Faults:
U104C00 - Rearview camera system control module
No communication
static
Priority - 2
Malfunction frequency counter - 4
Unlearning counter - 183
km-Mileage - 15604 km
Supply voltage, terminal 30 - 12.1 V
Terminal 15 - On
Unknown ambient data -
date - 2021-08-26 21:34:44
5F Multimedia
System description: MU-S-N-ER
Software number: 3Q0035846B
Software version: 0472
Hardware number: 3Q0035846B
Hardware version: H41
Serial number: VWZAZ2W0231563
Faults:
U111100 - Function limitation due to missing message
static
Priority - 6
Malfunction frequency counter - 1
Unlearning counter - 183
km-Mileage - 15604 km
Dynamic environmental data - 028679184402
date - 2021-08-26 21:34:43
I retrofitted a OEM rear camera (kit from kufatec) on my 2019 Variant. It was working very well after the coding through their OBD dedicated dongle and I just had a calibration error from OBDEleven scans.
After few days when I was driving I received a “park pilot not available” message in my discover media mk2. After that message park pilot and rear camera are not working anymore.
Can any of you help on checks to be performed prior to disassembly again all my car to check the cables?
Is this related to DC current or CANBUS?
Can’t understand how it worked for days prior to failing…once cable is routed you never touch it again!
Here the errors I receive:
19 Gateway
System description: GW MQB High
Software number: 3Q0907530AA
Software version: 5366
Hardware number: 3Q0907530C
Hardware version: 521
Serial number: 22121810802788
Faults:
U104C00 - Rearview camera system control module
No communication
static
Priority - 2
Malfunction frequency counter - 4
Unlearning counter - 183
km-Mileage - 15604 km
Supply voltage, terminal 30 - 12.1 V
Terminal 15 - On
Unknown ambient data -
date - 2021-08-26 21:34:44
5F Multimedia
System description: MU-S-N-ER
Software number: 3Q0035846B
Software version: 0472
Hardware number: 3Q0035846B
Hardware version: H41
Serial number: VWZAZ2W0231563
Faults:
U111100 - Function limitation due to missing message
static
Priority - 6
Malfunction frequency counter - 1
Unlearning counter - 183
km-Mileage - 15604 km
Dynamic environmental data - 028679184402
date - 2021-08-26 21:34:43
