|
|
Post by claymore on Aug 26, 2021 23:52:08 GMT
Hi, I'm trying to write a couple changes to module 3 on my 17 Audi S3. I swipe to write chages and am asked for a security code. After I enter one and get a sucessful message and tick, it goes back to the prompt for a security code again. It does not make the change to the module. any help would be greatly appreciated
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 27, 2021 10:12:49 GMT
Not sure when it started on the Audi motors but do you have the bonnet open when coding.
On the assumption you are using Android have you tried clearing the app cache that sometimes helps with stuff like this.
|
|
|
|
Post by claymore on Aug 28, 2021 5:29:45 GMT
Update, I’ve cleared all fault codes, opened bonnet, and changed from diagnosis to Dev mode. Still stuck in a loop asking for a code, giving me the successful tick then asking again.
No reply from OBDELEVEN support either
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 28, 2021 7:59:27 GMT
Support I am afraid don't work weekends so you wont hear anything from them other than WE HAVE NOT HEARD FROM YOU IN 24 HOURS auto email.
Not my car but have you checked to confirm the control unit is not locked out and have you tried changing the odx version (assuming you have more than one)
|
|
|
|
Post by claymore on Aug 29, 2021 1:35:20 GMT
How do I check to see if it’s locked out? I only have one device
|
|
|
|
Post by claymore on Aug 29, 2021 2:01:33 GMT
How to I change obx version? It’s just did an update, is that it?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 29, 2021 8:42:43 GMT
Firstly if you are running iOS Then you should be on V1.5.2 on Android then V0.44 If you are not then update your app. Having done that and still got issues For android this is how you see if its locked out cupra280.co.uk/obd11.html#isac there are no screen shots of IOS but the live data labels will be the same. For ODX Changes have a look at cupra280.co.uk/obd11.html#ODX IOS Setup is at the bottom of the article. One last question I presume you have a Pro or Ultimate license. The only other thoughts i would have are a re run a scan and see what errors you have in 03 Try and make a change to other items using Adaptation for example just to prove you can code in 03. In any event it would be worth posting up here what you are trying to change so experts in your car may be able to offer advise. |
|
|
|
Post by claymore on Aug 30, 2021 8:11:35 GMT
Thank you so much for your help but still it is not working for me. I re installed the app and checked my ODX version. It’s 070001 but it only gives me that one to choose from
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 30, 2021 11:52:32 GMT
No problem just so sorry its not sorted.
Afraid its a call to support (who are back online today)
|
|
|
|
Post by claymore on Aug 31, 2021 9:37:31 GMT
I’ve made a video of the issue. Just in case it looks familiar
|
|
|
|
Post by adelfloyd on Sept 6, 2021 12:13:29 GMT
Morning
Try to choose the security code before making the adaptation in the security access tab
|
|
|
|
Post by 045c112004 on Dec 2, 2021 3:38:02 GMT
Hi… just wondering have you sorted out the issue? I have the exact same issue as you and also in the brake module.
Keep asking for the security code and it accepted but not changing any values
|
|
|
|
Post by aussietig on Dec 17, 2021 5:04:25 GMT
Clearing the APP's cache on your phone often helps.
Settings/apps /obdeleven /open it ./ clear data/ clear cache Fixed a lot of faults
|
|
