Post by viinirocha on Aug 26, 2021 2:51:37 GMT
Hello dears!
I own a VW T Cross 2020 and noticed that some users are activating the TPMS sensors.
So I checked all over the internet, but all I could get was a TPMS error in the main panel and couldn't access the menu in the multimedia system to reset it.
Does anyone know how to activate it?
PS: I tried some of these but they didn't work as expected. Maybe I need to select other value "operation-menu_display_rdk_over_threshold_high", because they vary.
Thanks in advance.
^^^^^^^^^^^^ As Admin suggested!! But you might want to also check these settings:
module 5F>
>Channel "Vehicle function list BAP-tire_pressure_system_0x07"> should be set to "active"
> Channel "Vehicle function list BAP-tire_pressure_system_0x07_msg_bus"> should be set to" Suspension data bus"
> Channel "Vehicle menu operation-menu_display_rdk "> should be set to "active"
> Channel "Vehicle menu operation-menu_display_rdk_over_threshold_high "> should be set to "active"
And also check this code value
module 17> Coding> Byte 4> bit 0 should be ticked ("Indirect Tire Pressure Monitoring System (TPMS)")
Don
A Uruguayan seems to have managed this way in a GLI:
03 - ABS
byte 27 - bit 4,6
byte 28 - bit 7
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07> Set value to "activated"
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07_msg_bus> Set value to " Suspension data bus"
5F-Adapt-> Vehicle menu operation-menu_display_rdk > Set value to "activated"
5F-Adapt-> Vehicle menu operation-menu_display_rdk_over_threshold_high > Set value to "activated"
17 – Instruments
Coding Byte 4-> Enable bit 0 ("Indirect Tire Pressure Monitoring System (TPMS)
I own a VW T Cross 2020 and noticed that some users are activating the TPMS sensors.
So I checked all over the internet, but all I could get was a TPMS error in the main panel and couldn't access the menu in the multimedia system to reset it.
Does anyone know how to activate it?
PS: I tried some of these but they didn't work as expected. Maybe I need to select other value "operation-menu_display_rdk_over_threshold_high", because they vary.
Thanks in advance.
module 5F>
>Channel "Vehicle function list BAP-tire_pressure_system_0x07"> should be set to "active"
> Channel "Vehicle function list BAP-tire_pressure_system_0x07_msg_bus"> should be set to" Suspension data bus"
> Channel "Vehicle menu operation-menu_display_rdk "> should be set to "active"
> Channel "Vehicle menu operation-menu_display_rdk_over_threshold_high "> should be set to "active"
And also check this code value
module 17> Coding> Byte 4> bit 0 should be ticked ("Indirect Tire Pressure Monitoring System (TPMS)")
Don
03 - ABS
byte 27 - bit 4,6
byte 28 - bit 7
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07> Set value to "activated"
5F-Adapt-> Vehicle function list BAP-tire_pressure_system_0x07_msg_bus> Set value to " Suspension data bus"
5F-Adapt-> Vehicle menu operation-menu_display_rdk > Set value to "activated"
5F-Adapt-> Vehicle menu operation-menu_display_rdk_over_threshold_high > Set value to "activated"
17 – Instruments
Coding Byte 4-> Enable bit 0 ("Indirect Tire Pressure Monitoring System (TPMS)