Post by yababai on Aug 18, 2021 16:54:45 GMT
Hi Everyone,
Today got working automatic windows close on my ATECA FR 2019 and want to share the process of activation.
Perhaps it will work on other car models (in few days I'll test it on Octavia 2019).
Steps are below:
1 - Module 09 - Electronic control unit
2 - Adaptation
3 - ZV Komfort
4 - Regenschliessen ein aus - (Change value to Enabled)
5 - Menuesteuerung regenschliessen - ( Change value to Activated)
6 - Regenschliessen art (Closing mode) - (Change value to Permanent)
7 - Module 09 - Electronic control unit
8 - Subsystems - G397_RLFSS (Light and Rain sensor module)
9 - Long coding ( Bytes Mode)
10 - Byte 0 - (Activate Bits 1 and 2)
11 - Module 09 - Electronic control unit
12 - Long coding ( Bytes Mode)
13 - Set “Rain-/Light sensor” 1 (Byte 00, BIT 06).
In order for the windows to close in the event of rain, the wiper selector lever must be in Auto mode (in my car it's labeled as "INT" on wipers lever).
I have not tested yet if it closes the sunroof (doubt that it will work) but at latest it works for windows.
Regards.
Today got working automatic windows close on my ATECA FR 2019 and want to share the process of activation.
Perhaps it will work on other car models (in few days I'll test it on Octavia 2019).
Steps are below:
1 - Module 09 - Electronic control unit
2 - Adaptation
3 - ZV Komfort
4 - Regenschliessen ein aus - (Change value to Enabled)
5 - Menuesteuerung regenschliessen - ( Change value to Activated)
6 - Regenschliessen art (Closing mode) - (Change value to Permanent)
7 - Module 09 - Electronic control unit
8 - Subsystems - G397_RLFSS (Light and Rain sensor module)
9 - Long coding ( Bytes Mode)
10 - Byte 0 - (Activate Bits 1 and 2)
11 - Module 09 - Electronic control unit
12 - Long coding ( Bytes Mode)
13 - Set “Rain-/Light sensor” 1 (Byte 00, BIT 06).
In order for the windows to close in the event of rain, the wiper selector lever must be in Auto mode (in my car it's labeled as "INT" on wipers lever).
I have not tested yet if it closes the sunroof (doubt that it will work) but at latest it works for windows.
Regards.