|
Post by t5fourmotion2005 on Aug 16, 2021 16:51:57 GMT
Hi I have just changed the ABS-module in my 2005 T5. Here are some fault codes from the OBDeleven unit: Steering ange sensor [00778] All wheel drive control module [01324] ESP-Sensor unit [00493] Potentiometer for diaphragm posistion [01673] The part number for the "new" ABS module is 7H0 614 111 M. My guess is that I need to tell my car that the ABS module is replaced. Can this type of coding be covered with OBDeleven Pro? If yes, any hints on how to proceed? Kind regards Orjan
|
|
|
Post by t5fourmotion2005 on Aug 25, 2021 19:10:44 GMT
Screenshots from today's attempt: Entered the "Brakes"-unit after the scan illustrated above. Pressed "Coding" and found this layout: This T5 is a long version, differential lock at the rear and 16" inch wheels. So I changed the value to 0006176 as the screenshot shows. Assumed it basically 0000032 + 0000000 + 0006144 = 0006176. This did remove one of the fault codes I listed, but I was still left with the following: So I don't know. Maybe it was wrong of me to install a 7H0 614 111 M when the car originally was equipped with a 7H0 614 111 N. The way forward might be to try to get hold of exactly the same item number.
|
|
|
Post by t5fourmotion2005 on Sept 8, 2021 5:26:16 GMT
Good news: Got hold of a used ABS-module with same item number 7H0 614 111 N, replaced it and the issues vanished No coding was needed.
|
|
|
Post by skulebollen on Oct 17, 2023 19:54:37 GMT
Why did you change the module? I have an abs light and wonder if thats the problem
|
|